RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Wheels, Tires, Brakes & Suspension (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/)
-   -   Lost my Wheel Lock Key (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/lost-my-wheel-lock-key-128964/)

Spinning Sushi 10-15-2007 08:10 PM

Lost my Wheel Lock Key
 
So, I somehow misplaced the key to my wheel locks. They are the OEM ones and I need to change out my tires. Anybody know how to get these off without the key? How much would Mazda charge for a new key? Thanks in advance!

WoodsOfGreenRx8 10-15-2007 08:25 PM

There should be a manilla folder that the key was in, that had instructions on what to do if you lost it, or like abbid said, go have someone get them off..

DarkBrew 10-15-2007 08:30 PM

<$20.00 to replace it.
 
Check with the dealer to see if they registered the re-order number with your VIN.
Mine did not but they did strip my key. A tire shop owner told me the OEM locks are made by Mcgard so I called them.

http://www.mcgard.com/contact/

I took a digital picture of my lock pattern and sent it to Mcgard, paid $19.99 by credit card and they shipped me a new key.
Now I took a pic of my stripped key so you may have to take a clay mold of one of your locks.

EDIT
I should also mention that I could not use the Mazda master key because of my after-market wheels and could not use any lock removal kits for the same reason (no clearance). Of course after the fact everyone tells me I should be using tuner lugs with my wheels even though they put the wheels on my car with the OEM lock!!

LionZoo 10-15-2007 08:30 PM

If you take it to a local dealership that you have a good relationship with, they should remove it for you free of charge. Just put one four regular acorn nuts in place; that's what I did. Wheellocks are a negative feature in my opinion; it's better to just leave them off.

WoodsOfGreenRx8 10-15-2007 08:39 PM

Negative feature?

Atilla 10-15-2007 08:40 PM

thanks for the post John -

remember at the meet i told you i called up the dealership and they quoted me 60 bucks - 20 for bustin' the locks off and 35 for a set of OEM lugs...pretty weak compared to what abbid is saying - im gonna go to discount tires after work tomorrow...lol

Phil's 8 10-15-2007 08:58 PM

Those of you that choose to not use wheel locks please leave your address. You might want to check your insurance policy. Mine reads that if the car came equipped with them and they get stolen without the nuts then they are not covered.

Spinning Sushi 10-16-2007 12:48 AM

Thanks for the replies.


Originally Posted by DarkBrew (Post 2096883)
Check with the dealer to see if they registered the re-order number with your VIN.
Mine did not but they did strip my key. A tire shop owner told me the OEM locks are made by Mcgard so I called them.

http://www.mcgard.com/contact/

I took a digital picture of my lock pattern and sent it to Mcgard, paid $19.99 by credit card and they shipped me a new key.
Now I took a pic of my stripped key so you may have to take a clay mold of one of your locks.

EDIT
I should also mention that I could not use the Mazda master key because of my after-market wheels and could not use any lock removal kits for the same reason (no clearance). Of course after the fact everyone tells me I should be using tuner lugs with my wheels even though they put the wheels on my car with the OEM lock!!

DarkBrew, I'll check with the Stealership to see if they have my key registration. The key lock barely fit without scratching my aftermarket rims as well. If it's less than $20 bucks from them (which I highly doubt due to all the responses I got here) then I'll just go ahead and buy it there.


Originally Posted by abbid (Post 2096871)
I took mine to discount tire, they busted em off for 5 bucks each, and i replaced em with regular lugs.. who wants curbed OEM wheels anyway?

a master set will cost you about 60 bucks at your dealer..

If the cost of the wheel lock is over $20 then I'll head over to Discount Tires (I'm pretty sure there's one near where I live around here) to have them bust it off. Thanks abbid for the Discount Tire recommendation.

Spinning Sushi 10-16-2007 12:49 AM


Originally Posted by Atilla (Post 2096899)
thanks for the post John -

remember at the meet i told you i called up the dealership and they quoted me 60 bucks - 20 for bustin' the locks off and 35 for a set of OEM lugs...pretty weak compared to what abbid is saying - im gonna go to discount tires after work tomorrow...lol

If the stealership charges me too much, wanna head over to Discount Tires with me? We can see if we can get a special discount for them doing two cars :)

Spinning Sushi 10-16-2007 12:57 AM


Originally Posted by abbid (Post 2096871)
I took mine to discount tire, they busted em off for 5 bucks each, and i replaced em with regular lugs.. who wants curbed OEM wheels anyway?

a master set will cost you about 60 bucks at your dealer..

For those who lives in SoCal: I just discovered that Super Autobacs takes them off for $5 per wheel as well.

LionZoo 10-16-2007 02:27 AM

Tustin Mazda took it off for me for free. Of course, I did just buy something from Bob at the time, but I'd suggest not talking to their service writer, but instead the parts guy. They're generally more reasonable anyway.

Yes I think they're a negative feature, as in something I really don't like having included with the car. Other negative features for me include power seats, heated seats, leather seats, back seats, etc.

Spinning Sushi 10-16-2007 02:30 AM

I have another question. I have a midpipe on my car which is throwing a CEL. If I bring it to Mazda just for the wheel locks, would they cancel the warranty right away?

Phil's 8 10-16-2007 08:14 AM


Originally Posted by Renesis SE3P (Post 2097275)
I have another question. I have a midpipe on my car which is throwing a CEL. If I bring it to Mazda just for the wheel locks, would they cancel the warranty right away?

They should have no reason to even look at your dash, but you are not asking for warranty work so it should not even be brought up.

Atilla 10-16-2007 07:46 PM


Originally Posted by Renesis SE3P (Post 2097223)
If the stealership charges me too much, wanna head over to Discount Tires with me? We can see if we can get a special discount for them doing two cars :)

hell yeah i'll go! - lemme know when you wanna go

Spinning Sushi 10-16-2007 10:58 PM


Originally Posted by Atilla (Post 2098685)
hell yeah i'll go! - lemme know when you wanna go

Sorry, I already got mine off right before I met up with Conan. I took it to some asian tire place and they took it off for only $10 :) They broke one of their sockets though :rolleyes:


Thanks guys for all the help :)

8rotor8 10-18-2007 11:04 PM

You know, for all those out there... Mazda only has 5 different wheel locks, so you can ask a fellow Mazda owner if you can borrow theirs. When I lost my wheel locks, Mazda took mine off for me and I bought a set of gorilla Hex wheel locks, no more sockets scratching my wheels.

Atilla 10-18-2007 11:09 PM

^hmmmm....

5 different wheel locks you say?? hmmmm...hey! Renesis SE3P, DOZER, TAJ, APOCOLYPSE, MEGAMAN...can i see your stock key locks for a second?? :)

8rotor8 10-18-2007 11:12 PM

Yes sir.... The MS3 wheel lock worked on my car. Does anyone want to buy 4 locks with no key??? ;)


All times are GMT -5. The time now is 03:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands