Corksport Front upper Strut Brace review
2 Attachment(s)
Hi Everybody!
So I ordered this brace from Cork Sport. It came in all nice and shiny the welds look good overall a good part.. Fitment was great and I got it all installed in 15 Mins.. As I sat and marveled at my handy work and getting all installed with no problems.. I noticed that it gave no access to change the settings on my front coil over.. And is going to make changing the oil filter a PITA!!!.. I got the dampener extender nobs but for my camber adj. is still going to be a problem.. But over all it looks good and feels better and I like it just got to figure out some minor fixes.. Cell Phone pix.. Attachment 227828 Attachment 227829 |
1 Attachment(s)
Can you modify the brace to allow access to your damper adjustment? A drumel will probably do the trick.
|
2 Attachment(s)
yea good point.. i was thinking about using these they make 110mm size about 4.5" so this may work on this hole.. but im still bootied out on the camber adj.. :(
Face palm at my mistake.. i forgot to add this: Attachment 227810 V JCrane82 I have the Megan Racing Coil Over kit and it gives camber adj. (Camber Plates) Attachment 227811 |
What camber adjustment are you refering to? I am only aware of the cam bolt on the LCA to chassis for camber adjustment. Care to elaborate?
|
Edit to my last post..
|
I also have Megan coils and there's no camber plate. Our car doesn't require camber plates, since we have the bolts on the lower control arm.
|
2 Attachment(s)
Yea you guys are right... I was getting it confused with my Subaru.. MR coil overs on that too.. Ok. I was able correct my dampener issue..
Sorry crappy cell phone pictures.. Attachment 227719 Attachment 227720 |
Notice any difference in handling?
The brace is priced good, but it's bulky and limits access to the areas you mentioned so It's a no go for a good chunk of people running coilovers. |
Well.. I was mistaken about the Megan Coil Overs having camber adj. plates there on the top. So all I needed was access to the dampeners.. the Cork Sport Strut Brace is Very Light.. so its not going to add weight..It gives about 1 CM Diameter hole access to install a dampener extension That is what I did.. For other Coil over manufacturers you would need to see what they had available or modify the strut brace itself.. I have the rear cork sport brace too and it does stiffen things up.. Funny thing i noticed is going through a driveway entrance I can tell its more rigid for sure..
|
can you please share a pic or two of the rear brace?
|
loled at frUnt
|
All times are GMT -5. The time now is 11:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands