Calling all WORK wheel owners
#727
can someone tell me if these rims would fit? http://honolulu.craigslist.org/oah/pts/2614145703.html 19x9 and 19x10 w/ 45+ seems kinda =\ opinions?
#740
I have my rx sitting on eibach pro springs, i would like to install 18x9.5 with 255/35/18 on the back and also do 18x8.5 with 245/40/18 on front. Is this a good set up? I dont want to shave or rolling the fenders you guys think it will fit?
#748
Registered
hey yall ima bump this up...... show some love for my new rollers!!!
18"x9 +35 Work Meisters S1R (2 piece) A disks for all 4 corners. flat black center hi gloss black reverse lips. car is a 2005 BB so i'm hoping it will look pretty stealth. always wanted meisters so i'm pretty happy to get these.
18"x9 +35 Work Meisters S1R (2 piece) A disks for all 4 corners. flat black center hi gloss black reverse lips. car is a 2005 BB so i'm hoping it will look pretty stealth. always wanted meisters so i'm pretty happy to get these.
Last edited by yurcivicsux; 01-26-2017 at 09:15 AM.
#749
Registered
My specs for those interested:
FRONT - 19×9.5 +29 - 245/35/19 - A-Disk
REAR - 19×10.5 +36 - 275/30/19 - O-Disk
I went with maximum width and offset to stay within the guards, I have a slight poke of about 4-5mm, nothing major, no mods to the front but the rear I had to roll the inner lip and then pump them out as much as I could, I also shaved the rear bumper tab back to about 4mm from the bolt hole, I also had to cut the rear inner lining out.
Last edited by mazmorbid; 01-25-2017 at 05:28 PM.
#750
Registered
aggressive fitment, but damn looks good. meisters! FTW. i went very conservation with mine i got A disk all around in case of a brake upgrade in the future. can't wait for winter to clear up here and get these mounted. i weighed these also for anyone interested. 22lbs. so not as light as i would have thought when compared to a 18x9 Enkei RPF1 for example.
Last edited by yurcivicsux; 05-25-2017 at 12:51 PM.