|
Originally Posted by 8 Maniac
(Post 2785615)
woohoo... get to wrap my GT-F's in some rubber for christmas!
|
Show off Drew
|
Come on guys get those mounted so we can see some pics of them on your 8's already!
|
still waiting...
|
He has had mounted pics in his thread for a while now :) Post #209
Some of you guys need to visit other parts of the forum :lol: https://www.rx8club.com/australia-new-zealand-forum-37/drews-new-parts-119226/ |
Those look great. I'd prefer the 19's like the previous BB with the RE's.
|
Originally Posted by DrewMan
(Post 2785561)
Here's my updated ride w/ 20 mm eibach pro spacer installed... not wide enough though.. should get the 30 mm spacer instead... http://i513.photobucket.com/albums/t...2008/1iv-1.jpg http://i513.photobucket.com/albums/t..._2008/1iii.jpg http://i513.photobucket.com/albums/t...88_2008/1i.jpg http://i513.photobucket.com/albums/t...8_2008/1ii.jpg |
^ nice wheels but you loss some serious lips for going with such high offsets
|
I fell victim to the pothole monster. Thought I came out unscathed when I checked my front wheels. A few days later, discovered it was the rear driver side that took the damage. The lip is bent and air leaks.
Any suggestions on a fix? Anyone used or heard of Wheels America? They charge a flat fee of $129/wheel. The cost also includes powdercoating. I may consider sending all 4 in for a flat black center. |
Originally Posted by RA-Eight
(Post 2811218)
I fell victim to the pothole monster. Thought I came out unscathed when I checked my front wheels. A few days later, discovered it was the rear driver side that took the damage. The lip is bent and air leaks.
Any suggestions on a fix? Anyone used or heard of Wheels America? They charge a flat fee of $129/wheel. The cost also includes powdercoating. I may consider sending all 4 in for a flat black center. anyways the reason why i say they are ok is because the bent is still a little visible to me because i know where it is and the paint job quality isn't that great. the color a little off, its like a slightly different shade. all in all i would give them a 7/10. well i guess i cant judge all the franchise shops out there, but the one where i went to was in Union city CA. BTW good luck! |
Originally Posted by SiLVeRE8
(Post 2812105)
i got my front passenger ce28 fixed by wheels america and i would have to say that they are ok... what happened was the lip got bent pretty bad like the shape of a V from me skidding into a curb. i brought it to them and got it fixed for about $200.
anyways the reason why i say they are ok is because the bent is still a little visible to me because i know where it is and the paint job quality isn't that great. the color a little off, its like a slightly different shade. all in all i would give them a 7/10. well i guess i cant judge all the franchise shops out there, but the one where i went to was in Union city CA. BTW good luck! Other than the match how was the quality of paintwork/powdercoat? Any running, flaking, orange peel, etc.? |
Anyone know if Rays paints or powder coats their wheels?
|
They definately powdercoat all of their wheels because I know my GTS and the TE37 are. Also, mine has not scratched at all on the powdercoat, so I know for sure they have been. Also, when I ordered them, Rishie told me they were powdercoated.
|
It depends on the wheel, FYI.
Some are paint, powdercoat, or Anodized. Rishie |
Any idea on G-Games 99b?
|
|
^Ha nope he hasnt posted pics yet. I'm also very excited to see them mounted, So hurry it up!!
|
Originally Posted by jptalky
(Post 2823481)
Did I miss a new thread with these mounted? I want to see what the look like on your BB.
|
I'm counting down the days to fine summer weather so I can mount up my Volks and finally post some pictures in this thread!
|
Can't wait! Post some teaser pics for us while we wait.
|
teaser is in his avatar. ;)
|
Originally Posted by 8 Maniac
(Post 2823687)
unfortunately, no. I can get tires but I need to get my fenders rolled. My rims are in houston at my house and I'm in san antonio for college. So I'm going to have to roll the fenders in SA, then go to houston to get tires and have it all mounted. Problem is finding a weekend or I have to wait till spring break. So hopefully it wont be too long, but spring break at latest I think.
ive got them with the gold.... first time ive seen them in a custom color...theyre gonna look saweet |
not all wheels from RAYS are powdercoated. majority of them are painted. same goes with work wheels.
|
OK so I am completely angry and frustrated,,,
I am looking for somplace to order the black anodized fasteners that come with just about any two piece Volk/Rays wheel... I have contacted Mackin Industries directly, contacted just about every vendor on here, even some inside people,,, No one will sell me a new set,,, I currently have the chrome/plain fasteners on two of four wheels and are trying to get all black finish fastener bolts, Ive even gone to a Metrics Co. and they dont have anything close... I cannot believe that these are unobtainable and its just a 'tuff shit' situation,,, If anyone has any help or any way of secure 40 fastener bolts that have the same dimensions as the ones on our wheels please, please PM me... This is rediculous that not a single inside source can lead to a result... If there is anyone who would even like to trade thier black fasteners for some polished/chrome fasteners that would be helpful too... |
All times are GMT -5. The time now is 07:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands