|
^^
let me check on that guys...i forget.. its acutally 4 separate pieces... it comes from a company that specializes in all kinds of badges. i'll look for the website :) |
That is pure sex....
|
Originally Posted by Whitehot
(Post 2417097)
If you went with 18x8.5's you could still stretch the stock tires on. 19x8.5 +38 all around is what I have. Flush with the fenders but no rubbing. My 245/35 tires are fairly close to the stock diameter; just a little bit taller. However, the GTS/SF wheels are both blingy wheels that don't really look good unless they're big and wide with low offsets. Drop the front instead of raising the rear if you're going for some kind of dragster look.
Thanks Whitehot. Man ya'll are great! I am super excited to get this project started. Have upholstery and paint mods in mind, a certain kit, which will remain nameless at this time, the SF wheels are a for sure now...I have kei-office eyelids installed, and a few minor mods. Nothing to the engine, will be done, except some graphics to the entire set up of covers. I just dont need a cold air intake, but have thought about changing the exhaust. I just haven't found the right 'throat" I'm looking for yet! ;) Lowering the front a bit I think is exactly the look that I want. Hopefully by this time next year she'll be show ready. :D: |
Originally Posted by shinka213
(Post 2417278)
^^
let me check on that guys...i forget.. its acutally 4 separate pieces... it comes from a company that specializes in all kinds of badges. i'll look for the website :) |
Another set of GTF's
Here are some other shots of GTF wheels. Sorry about the quality of the pics. I took them with my phone....
http://gallery.mac.com/jbucovetsky/1...G_0097/web.jpg http://gallery.mac.com/jbucovetsky/1...G_0096/web.jpg http://gallery.mac.com/jbucovetsky/1...G_0098/web.jpg |
Looks good. Get the rear diffuser!
|
I got a question to all the fellow RAYS wheel owners, I would like to know where is the best place to purchase some?! To be specific, I'd like to buy some SF Challenge's in RMC finish..
|
To be honest, I don't think the SF challenge would look good in chrome. Go with gold. I think gold on a VR would look even better. Keep in mind that you would have to wait for several months for your Volks to come in. imdanomite is selling his right now:
https://www.rx8club.com/rx-8-parts-sale-wanted-44/gi-19-volk-racing-sf-challenge-gold-144290/ |
Originally Posted by thebiggdaddy
(Post 2431978)
To be honest, I don't think the SF challenge would look good in chrome. Go with gold. I think gold on a VR would look even better. Keep in mind that you would have to wait for several months for your Volks to come in. imdanomite is selling his right now:
https://www.rx8club.com/showthread.php?t=144290 |
Originally Posted by ЯX-8
(Post 2431647)
I got a question to all the fellow RAYS wheel owners, I would like to know where is the best place to purchase some?! To be specific, I'd like to buy some SF Challenge's in RMC finish..
tell them i sent you... excellent customer service.... i can tell you that any 2 or 3 piece rim will take approx 3months ETA..since they are custom... :) |
Originally Posted by shinka213
(Post 2432056)
contact Dat Nguyen, Prez of Vertex-USA..in Cali...they are on the web...
tell them i sent you... excellent customer service.... i can tell you that any 2 or 3 piece rim will take approx 3months ETA..since they are custom... :) |
So, no one else can recommend another vendor besides what Shinka213 has recommended?
|
Originally Posted by shinka213
(Post 2432056)
contact Dat Nguyen, Prez of Vertex-USA..in Cali...they are on the web...
tell them i sent you... excellent customer service.... i can tell you that any 2 or 3 piece rim will take approx 3months ETA..since they are custom... :) |
There's always me. www.autornd.com
Forum Vendor and acknowledged Rotary wheel fitment guru. hehe. Plus i'm about to start a Ray's GB since i just finished up the Enkei ones. Rishie |
19' SF Challenge's
3 Attachment(s)
Here's another owner
|
Looks good Billy!
|
^indeed he is :)
|
Hey Guys after nearly 2 months of waiting, I have received confirmation that my wheels are finally coming some time next week. I will post pics once they are mounted. What cleaning tools do you guys use to clean your Volks? Now that I spent so much on wheels, I don't want to scratch them up. I know about waxing them and using microfiber towels, but any other suggestions would be greatly appreciated. Thanks.
|
Originally Posted by ЯX-8
(Post 2435341)
So, no one else can recommend another vendor besides what Shinka213 has recommended?
LAZI (rx8 vendor) or his AIM (drivelinesam). boy can get you anything you want!! very honest and i have ordered my works from him. daniel desmond (sales@desmondperformance.com) has helped me from the beginning since the first day i purchased my 8. |
Originally Posted by Rx8 Fanatic
(Post 2497161)
Hey Guys after nearly 2 months of waiting, I have received confirmation that my wheels are finally coming some time next week. I will post pics once they are mounted. What cleaning tools do you guys use to clean your Volks? Now that I spent so much on wheels, I don't want to scratch them up. I know about waxing them and using microfiber towels, but any other suggestions would be greatly appreciated. Thanks.
|
Originally Posted by pdxhak
(Post 2497226)
In addition to waxing and polishing, clean them with the same high quality soap you use to wash your car. I wash my wheels inside and out every week. But I have 5 spokes so cleaning the inside is very easy.
Steve @ Evolution is where I got mines from. |
Originally Posted by ЯX-8
(Post 2435341)
So, no one else can recommend another vendor besides what Shinka213 has recommended?
PM him he has the BEST!!! deals on volk wheels. Believe me ive priced them around. |
Originally Posted by Rx8 Fanatic
(Post 2497161)
Hey Guys after nearly 2 months of waiting, I have received confirmation that my wheels are finally coming some time next week. I will post pics once they are mounted. What cleaning tools do you guys use to clean your Volks? Now that I spent so much on wheels, I don't want to scratch them up. I know about waxing them and using microfiber towels, but any other suggestions would be greatly appreciated. Thanks.
Currently running on my track set-up, Rays Gram Lights 57F: http://i32.photobucket.com/albums/d27/rax8/DSC02621.jpg http://i32.photobucket.com/albums/d27/rax8/DSC02625.jpg |
damn, that sucks.
|
Originally Posted by billy19usa
(Post 2437846)
Here's another owner
|
| All times are GMT -5. The time now is 12:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands