Base/Non-DSC ABS Lines
 

I need some help. I'm swapping a base model Sumitomo Non-DSC ABS unit into my GT which was originally equipped with a Bosch DSC ABS.
The hard line routing is different between the two and the factory service manual isn't clear about the routing and the unit isn't labeled like the DSC unit. So I need someone with a base Non-DSC ABS unit to look at theirs to tell me which port goes to which corner and where the lines coming off the master cylinder go.

<a href="http://imgur.com/n3g1miM"><img src="https://i.imgur.com/n3g1miMh.jpg" title="source: imgur.com" /></a>