Does anyone know if the Bilstein PSS9's can be converted into double adjustables? Is there a PSS10 coilover offered for the RX-8?
|
I've never seen PSS10's for the RX-8. I have seen some incorrectly labeled as PSS10's on European vendor sites. Your best bet is contact Bilstein and ask them if the PSS9's can be converted to double adjustable. They have always been great about answering my questions.
|
How low can you go with this setup? anyone know can? can you tuck the rear tires?
|
Yes you can tuck the rear tires and stay within the recommended lowering range, on the strut I am about 10mm up from the lowest setting. It also depends on your wheels tires. With my stock wheels/tires my rears are slightly tucked. My tires in those pictures have a smaller diameter which causes more wheel gap.
|
Originally Posted by Peppy@kacework
(Post 2768550)
Yes you can tuck the rear tires and stay within the recommended lowering range, on the strut I am about 10mm up from the lowest setting. It also depends on your wheels tires. With my stock wheels/tires my rears are slightly tucked. My tires in those pictures have a smaller diameter which causes more wheel gap.
|
Originally Posted by Peppy@kacework
(Post 2768515)
I've never seen PSS10's for the RX-8. I have seen some incorrectly labeled as PSS10's on European vendor sites. Your best bet is contact Bilstein and ask them if the PSS9's can be converted to double adjustable. They have always been great about answering my questions.
|
anymore updates and impressions?
adjustments made? |
I will post a full view on my opinions AFTER i get an alignment. Put my coilovers on without aligning the car (and the car hasn't be aligned in 2 years as it is!).
Side question: Corner balancing worth the extra? |
get pics of the stance too if u dont mind.
|
Hello.
I am running my RX on Bilstein PSS (JDM). I bought last year from a friend that sold his RX and traded with my stock ones. I think they feel great. Recomended. |
stance pics?
|
Here's the stance at speed and taking some turns, lol. Pictures courtesy of SilverEIGHT
http://img.photobucket.com/albums/v2...wrx/track6.jpg http://img.photobucket.com/albums/v2...wrx/track7.jpg http://img.photobucket.com/albums/v2...wrx/track4.jpg http://img.photobucket.com/albums/v2...wrx/track2.jpg |
looks good.
|
Now if only one of the venders would set up a group buy for these for around $1100. I would definitally think about getting some!! :)
|
Originally Posted by topgear8
(Post 2785960)
Now if only one of the venders would set up a group buy for these for around $1100. I would definitally think about getting some!! :)
|
^I would love to be at CMP in Feb because it is only about an hour and a half from my house. But I'm not sure if I will have my azenis by then. I just got some black rpf1's, just like you :) Then I will be getting the azenis, So if I got the PSS9's We would have very similar cars :)
|
If anyone is thinking about pulling the trigger on these, I noticed shox.com has a 5% off coupon code on their site right now, says it applies to everything but konis. It's not a huge discount, but it's something.
|
which after market sway bars would work well with the pss9 coilovers? i was thinking of running them with racing beat sways. Any thoughts?
|
i have the agency sway bars with my pss9's setup is great. however i still must have assembled my pss9's wrong. i have rattleing coming from the front.
|
Originally Posted by supra sean98
(Post 2799079)
which after market sway bars would work well with the pss9 coilovers? i was thinking of running them with racing beat sways. Any thoughts?
My Two Favorites are AP and Progress. I ride AP on my car and have yet to try them out with the new end links I am trying out. I was extremely satisfied with my AP. |
^This man got hit in the head with something. Racing Beat sways are great! :)
|
I just put the Progress bars on. I picked them cause they were adjustable and I got them stupid cheap.
|
Originally Posted by topgear8
(Post 2814291)
^This man got hit in the head with something. Racing Beat sways are great! :)
|
^Not exactly true, because he does also sell RB sways on his website. He just prefers solid over hollow bars.
|
Peppy,
Did these come with a shock dyno sheet? If not, does anyone have a dyno sheet for the PSS9's? Due to the spring rates I'd be interested to see how they are valved. |
All times are GMT -5. The time now is 07:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands