RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Wheels, Tires, Brakes & Suspension (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/)
-   -   19x9.5 & 19x10.5 +22 all around (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/19x9-5-19x10-5-22-all-around-193342/)

NoPistons4Chris 03-17-2010 01:29 PM

19x9.5 & 19x10.5 +22 all around
 
Wondering on the fitment for these. I plan on running these with f)245/35/19 r)275/30/19. FYI my fenders are rolled already. I previously had 19x8.5 & 19x9.5 but my offset was + 35 and plus 38 and the car was lowered enough where the gap is basically flushed, or no tire gap.

Thanks guys!

tbk 03-17-2010 01:46 PM

you're gonna need a pretty good pull/camber to fit the rear. front should be fine with a roll i think

tiltmode43 03-18-2010 02:40 AM

19x10.5 +22 w/275 is not going to be fun to fit. Technically, that setup is doable though...

2tone 03-18-2010 08:35 AM


Originally Posted by tiltmode43 (Post 3475757)
19x10.5 +22 w/275 is not going to be fun to fit. Technically, that setup is doable though...

yeah, if 18x9.5 +30 w/ 275's rubbed, i can only imagine what 19 / 10.5 +22 would be like. seems like a bit much for our cars...





and there is an entire thread dedicated to answering this very question...............................

NoPistons4Chris 03-18-2010 12:44 PM


Originally Posted by tiltmode43 (Post 3475757)
19x10.5 +22 w/275 is not going to be fun to fit. Technically, that setup is doable though...

I like doable :fingersx:


Originally Posted by 2tone (Post 3475883)
yeah, if 18x9.5 +30 w/ 275's rubbed, i can only imagine what 19 / 10.5 +22 would be like. seems like a bit much for our cars...





and there is an entire thread dedicated to answering this very question...............................

I had 19x9.5 with 285's at one point with no rubbing issues and I was slammed as low as possible before.:)

2tone 03-18-2010 12:49 PM


Originally Posted by NoPistons4Chris (Post 3476312)
I had 19x9.5 with 285's at one point with no rubbing issues and I was slammed as low as possible before.:)

hey, if you can do it, more power to you! at what offset was your set-up though?

edit: saw post #1...offset of +35 and/or +38. you're going an inch wider in rim size, and pushing them out 12 to 15 mm, so, yeah, it would be tight.

StealthFox 04-10-2010 06:03 PM

if tilt is suggesting a difficult situation, i would follow that, he's fit some retarded wide/low offset wheels on his rx8. other than that im my opion go for it! thats the exact fitment i want to try so you can be the test guinea pig!! i hope fender rolling and a little neg camber will do the trick. and it wont pop the sidemarkers out :'(

Fate710 04-10-2010 06:25 PM

I'm already gona call this. PULL = 150% yes required I don't give a fuck how much camber you run.

Camber department you are probably looking at -3.5* at least if you plan to run that big of a tire

urbanlegendrx8 07-26-2010 02:04 PM

So did you end up getting it to fit with the 19x9.5 & 19x10.5 set up??? Reason I ask is I'm thinking of getting a set of 18X9.5 for the front and 19X10 for the back...offset i'm not sure yet...gotta get ahold of the seller. They are enkei RPF1 fyi.

Alex37 12-25-2014 12:44 AM

Rx8 04
 
Hi .. What about 19x9.5 and 19x10.5 rims with tires 225 35 19 and 265 35 19 fit ? On the rx8 04 automatic transmission ??? Thank you guys for replay me and infor me ...

Alex37 12-25-2014 01:03 AM

Rx8
 
What do you mean ? The tires 265/35/19
225/35/19
Not fit on the rx8 ?
Cuz I ready have the rims not monten yet ... But I need some tires for the rims I want wide tire on the back ...help 🙏


All times are GMT -5. The time now is 07:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands