RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Trouble Shooting (https://www.rx8club.com/series-i-trouble-shooting-95/)
-   -   starting problems (https://www.rx8club.com/series-i-trouble-shooting-95/starting-problems-165721/)

lee11 01-31-2009 11:01 AM

starting problems
 
I was wondering if any one could shed so light on a problem i have with my engine starting. My rx8 starts when its cold, its not always a smooth start but if the engines been running a while and i turn it off it wont start till its cooled down, usally takes 10-20 mins afterwards. If any one has any ideas i would be very greatfull.

EDZRIDE 01-31-2009 11:22 AM


Originally Posted by lee11 (Post 2844596)
but if the engines been running a while and i turn it off it wont start till its cooled down, usally takes 10-20 mins afterwards.

Does it crank over (but not start); or does it fail to even crank?

Silver06 01-31-2009 11:37 AM

lee11 - to add to EDZRIDE's questions:

Year, mileage?

A/T or M/T?

Does it have the updated starter, battery (2004 / early '05)?

How long since (plugs, cables, coils) have been changed?

Has the compression ever been checked? Has the engine been cleaned (Mazda Zoom cleaner or SeaFoam)?

Is the Check Engine Light On?

Also - how long have you owned the car? Is the problem gradually getting worse, or did it begin all at once?


*Sorry for all the questions, but sometimes it's a pain in the ass to wait until the second or third page of the thread to get *THE FACTS*

Cheers.

lee11 01-31-2009 04:06 PM

its a 2003 m/t its done 48k it does crank none of the lights come on mazda have changed one of the leads and spark plugs and the engines fine they checked it when they changed the lead, could it be a sensor? i dont know about the starter and the battery looks like a crap one the guy put in there b4 he sold it to me. I should of looked into it more b4 i brought it thanks for the help i appretiate it

Brettus 01-31-2009 04:15 PM

Try replacing the air filter and cleaning the maf sensor

ronn111 11-21-2009 06:54 PM

i got the same problem my rx8 starts when its cold, its not always a smooth start but if the engines been running a while and i turn it off it wont start till its cooled down, usally takes 10-20 mins afterwards.its a 2004 and done 38000miles,it started doing this 2weeks after a full service, so If any one has any ideas i would be very greatfull.

Old Rotor 11-21-2009 09:21 PM


Originally Posted by ronn111 (Post 3325856)
i got the same problem my rx8 starts when its cold, its not always a smooth start but if the engines been running a while and i turn it off it wont start till its cooled down, usally takes 10-20 mins afterwards.its a 2004 and done 38000miles,it started doing this 2weeks after a full service, so If any one has any ideas i would be very greatfull.

Bring it back to the people who did the full service....unless it was you...

ronn111 11-22-2009 01:19 PM

when i took it back they said its a problem that had nothing to do with a full service & i will be looking @ around £400 to get it fixed & didnt say what it was. i need some ideas guys

shaunv74 11-22-2009 02:00 PM

My guess is they over filled the oil and some if it flowed into your intake pipe and dirtied your MAF. Pull out your MAF sensor and inspect the wire to see if there is anything on it and see if there is any oil in your intake tube.

Old Rotor 11-22-2009 09:43 PM


Originally Posted by ronn111 (Post 3326293)
when i took it back they said its a problem that had nothing to do with a full service & i will be looking @ around £400 to get it fixed & didnt say what it was. i need some ideas guys

You need to ask them what they are going to do for that money, parts and labor. Please give us the history on your car. The service it's had parts replaced(on that last service). Did you do all four coils , wires and plugs? Type of driving it gets(long commutes, short trip), fuel used(reg or prem), ever flooded, mods installed. Some on here have had this problem and it was low compression. A couple of cans of de-carbon cleaner(Seafoam or BG44K) might improve compression. This is just a start look at the bottom of the page for some more ideas.


All times are GMT -5. The time now is 01:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands