SSV, VDI Solenoids part #'s - 0661, 0076 Error codes
 

Done a good deal of searching here and confused with conflicting info as much as anything... One, I had these codes throw earlier this spring with a CEL. Reset the codes and now have the p0076 code with the p0061 code pending now without a CEL...

First question is what are the affects of running the car as-is with these codes, e.g. it won't harm anything, reduced performance?

Two, I've read info that the two solenoids that commonly throw these codes have the same part number: K5T49091 and read other info that isn't the case.

Thanks in advance for any help, I'm familiar how to replace the solenoids if needed by removing the UIM to get access to them. Instructions here replacing those are very good and more importantly consistent...

Good places to start. Oh yeah, Google is your friend.

P0076 Intake Valve Control Solenoid Circuit Low (Bank 1) DTC

https://www.rx8club.com/new-member-f...une-up-245799/

Thanks a lot, did a lot of searching but that helps a lil'. Still need to know what parts I need and if they use the same solenoid. part # K5T49091

yes, all 3 are the same, Part number is KL01-18-741

As a cheaper alternative, you can use Dorman's 911-707

Replace all 3 at the same time, saves you time.

you are welcome.

Part #K5T49091 isn't correct, that's what I found elsewhere here on this forum?