Rx8 RPM Cutoff limit to 8500 i can increase?
Hay i can increase RPM Cutoff limit 8500 to 9500 i have Mazda Rx8 Type S Japanese 6 Forwarded manual.
Thanks |
1 Attachment(s)
You can to 9300 with an accessport tuner and the stage 1 performance map, or MazdaManiac maps.
|
COBB TUNING AccessPORT work on Japanies, 6 Speed, 2005 Models?
Thanks for reply
Originally Posted by Huey52
(Post 3252638)
You can to 9300 with an accessport tuner and the stage 1 performance map, or MazdaManiac maps.
|
Hymee's protuner will definately do it and will remove the speed limiter as well .
I have JDM 6 speed . I don't understand why your car would be limited to 8500 though . All 6 speeds ,JDM or otherwise, are set at 9000rpm |
Increaseing the cut off will do nothing on a stock car, and FI cars peter out well before that RPM range.
Your barking up the wrong tree. Increased RPM does not equal more power. |
racing beat race reflash. almost 10000rpm.... i love it
|
Originally Posted by Razz1
(Post 3253438)
Increased RPM does not equal more power.
|
The AccessPort is available for JDM cars. It can raise the rev limiter to what ever you want.
If you get one, get it from Mazdmaniac and you get 6 months of FREE tunes. |
Extra bit of time... +500 RPM anyone? :-)
Originally Posted by TheWulf
(Post 3254806)
True, however there are other good reasons for doing it... like getting that extra bit of room without the need to shift in Autocross..
I am in a different situation - I am from Czech republic and I have a European 4Port 5 Speed version but I would really like to have that extra 500RPM before cut-off. I know it would go with no power gain in those extra rpms but that extra time to shift is what I need and also you pass 98-102-104 kmh exactly when you getting too close to that cut-off ( "magic" 100 km per hour :-) ). I have no way to know if for example HYPERTECH MAX ENERGY would work. I know it most certainly would only work with highpower engines (6-Port). My question is different - Can you use it only to just INCREASE that limiter and keep your ECU MAP otherwise absolutely intact? Or is it complete reflash - taht would make it unusable for my 4-port... Can anyone help with some ideas. I do not want to go for COBB because my MAP is exactly what I want - very driveable, good fuel economy also... Just those RPMs needed. |
All times are GMT -5. The time now is 06:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands