problems after ipod integration
 

Before i start i want everyone to know i searched but couldnt find a solution.
recently i installed an ipod integration kit and long story short i did it twice bur the second time i disconnected the battery and now the tire pressure light keeps blinking after 5 mins of driving an my tpms tool wont detect my sensors(not even before this problem) and my faceplate keeps coming loose especially in hot weather so it keeps going off and sometimes it wont stay on no matter how hard i push so any help?

I recently did this as well. I had issues with the artifacts showing on the LCD. Yesterday I took the radio back out and inspected all the contacts. One bolt was making its way out so I tightened it along with the other contacts on the back of the faceplate. Just make sure you installed all bolts in the correct places...esp the bolt under the dash....just make sure not to over tighten that one.

Uh oh do u mean the hardest one to get to? Cuz that one fell back there

Yes! The PITA one! Check to make sure it just didnt fall under the carpet. You need this one to secure the radio, and help with the faceplate contacts.

Well it been a couple days since the work was done so it might be lost for good but i have a bunch of spare bolts for various things and access to a bunch of screws and bolts, any chance i can substitute?