p0107
 

just got my car scanned on a friends scanner and I got back this one code only. What does it mean? He had a generic list and it said something about manifold something something pressure I didn't really understand it. Any idea what the code means???? I also have the light that looks like a car with squiggly lines underneath, I think it has something to do with traction control. It's always on and I can't turn it off. Any ideas on how to fix these 2 issues? Please help!!

Diagnostic Trouble Code (DTC) P0107
DTC Definition: MAP/BARO Circuit Low Input

what does that mean???

This code is generated when the voltage drops below 0.2V.
Check the wiring and the harness to the sensor.

where exactly is this sensor located?

Do you see the battery cover at the bottom of my attached pic?

this should help too

VERY INTERESTING. I removed my secondary air pump. I figured out that the big resistor on the pump mount was needed (fuel pump) but I didnt realize that there was a sensor on there. I have the same two issues. Solid DSC light and p0107 code. DSC must need this sensor. Will go hook it up.

I also have an RKE error. I have no idea what that is.

Just as I thought. When I reinstalled the sensor both lights went away. The DSC error and the p0107 cel are tied together some how.

REK 000039 has been reported as an unkown issue.
As far as we know... it doesn't effect performance.

So changin the baro sensor worked?

I LOVE this Forum
 

Thanks to this thread, I was able to easily locate the sensor and find a cut wire. Fixed it and eliminated the CEL.

I included a pic. hopefully it goes thru.
https://cimg1.ibsrv.net/gimg/www.rx8...b72337351.jpeg