|
New engine codes( p0139, p0076)
Good morning Rx8 club once again Im here asking for the wisdom of this life saving forum lol. Two nites ago the check engine light came on the but the car is running beautifully. So this morning once I got to work I plugged the scanner in to find out whats up and I have 2 codes the p0139 and a p0076. I know its a bad air control solenoid(s) and a possible o2 sensor but I was wondering if the combination of the two holds som significance. I have an 05 6spd with an aem intake and after market converter which I had glowing once do to a missfire, but She has shown no signs of failure. Maybe I cooked the insides out of the converter I simply do not know.
Any and all help as always is apreciated |
P0076 - VDI solenoid valve control circuit low (this is one of the intake valves)
Possible Causes: VDI solenoid valve malfunction Connector or terminal malfunction Open circuit in wiring harness between main relay terminal C and VDI solenoid valve terminal A Short to ground in wiring harness between main relay terminal C and VDI solenoid valve terminal A Open circuit in wiring harness between VDI solenoid valve terminal B and PCM terminal 1W Short to ground in wiring harness between VDI solenoid valve terminal B and PCM terminal 1W PCM malfunction Purge solenoid valve malfunction Looseness of rear HO2S Leakage exhaust gas Rear HO2S malfunction Fuel line pressure malfunction Leakage fuel Fuel pump unit malfunction AIR system malfunction Leakage engine coolant PCM malfunction No connection betweel the two, solve independantly. |
| All times are GMT -5. The time now is 01:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands