need help!!!!!!
My car won't start up I need help!!!!
so my clutch bracket broke so I took it off and went to go solder it which took me few days since I don't have time till the weekend.after soldering it I put the clutch peadal back on my car did not start.my friend help me push start the car and it did start but after I went for a spin around the block it turned back off.and when I try turning the key I don't get anything what can it be My car was off all week |
There is a switch you'll need to adjust so that it senses the clutch is pushed in. You'll need to pull on the switch part to extend the switch so that the car senses the clutch is pushed in and will allow you to start it. I'll try to search for a picture or link for you. This is a common problem when someone takes off the clutch bracket.
|
This thread explains it best. https://www.rx8club.com/showthread.p...h+pedal+switch
|
man this makes sense now ill have to wait till i get home to c if thats really it
|
well yeah that was the problem i could only turn it back on with my hand on the sensor i cant make the sensor come back all the way out i tried already the thread but nothing still
|
Just give it a good tug and it will come back out. I had to pull on it pretty good then it finally extended. I was scared of breaking it too, but you wont break it.
|
All times are GMT -5. The time now is 07:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands