ChillinRard |
01-12-2012 08:26 PM |
Alright guys well i invested in me a diagnostic tool scan my pcm having this rx8 for 2years im tired of going up to auto zone, after running it i got codes: P2070, P0302, P0420, and p0704. After doing lots of research going in n out of threads i see Intake Manifold tuning valve stuck open bank 1 is what is malfunctioning so ima pull that and clean it following a thread i found. I also found from code P0302 that i have a Cylinder 2 Misfire Detected, i believe that is a result of me having a bad ignition #2 coil is what the tool is saying, to cure this i will buy the BHR ignition kit, yes overkill but ive been eying it on here for a while that that Charles guy is selling because i been needing to change my wires and coils anyways, it seems to make a big difference so i will invest in it, if anyone have any info or suggestions on it speak up im still learning so im ALL EARS! Based off what ive said if u got anything else to help out it'll b greatly appreciated seeing that i cant drive for 10 to 15 miles without it killin on me and fouling the plugs and having a etremly hard time cranking up! Wish me luck my 8 is too clean to b sittin in the garrage :pat:
Mod Notice to Poster:
13. Multiple posts about the same thing across many forums are considered "spamming" the site and may result in the poster being banned. (alnielsen)
|