How to get at the Fuel Injectors
 

I have managed with the help of my wifes little fingers, to get the Intake Manifold off, but cant figure out what the next step is to get at the injectors.

For the secondaries, from this thread https://www.rx8club.com/series-i-tech-garage-22/fuel-injector-info-150432/ I am assuming I just need to remove the 2 bolts to release the rail but what else am I going to have to remove to be able to take them out?

Dont even start me on the primaries.

Any help appreciated.

Cheers

Andrew

2 Bolts - and the injectors are just in there with some real tight o-rings.

Be careful not to drop any into the motor.

Disconnect the fuel line first.

Ok I am assuming the blue connector in the middle picture is the fuel line?

As for the injectors, I am assuming you just give em a yank and they will come out? And to watch out for the orings falling off?

Does this go for the Primarys? no bolts to undo?

Cheers

Andrew

You are correct on all counts.

Woooo :) Thanks Kane. I am gonna get this AccessPort working by hook or by crook.