RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Trouble Shooting (https://www.rx8club.com/series-i-trouble-shooting-95/)
-   -   Faint squeaking noise... (https://www.rx8club.com/series-i-trouble-shooting-95/faint-squeaking-noise-168393/)

xdj_jdx 03-06-2009 04:50 PM

Faint squeaking noise...
 
There is a Squeaking noise coming from the engine bay when im at idle was wonderingif this is just a bad belt if so what do i look for on the belts to determine if they are bad thank you.

DOMINION 03-06-2009 08:06 PM

1 Attachment(s)
It could be one of two things.
1. Belts or 2. see attchment-red circule yup, its going out.

DOMINION 03-06-2009 08:07 PM

https://www.rx8club.com/series-i-tech-garage-22/lost-air-pump-88157/

-Gil

EDZRIDE 03-07-2009 11:28 AM


Originally Posted by xdj_jdx (Post 2901093)
There is a Squeaking noise coming from the engine bay when im at idle was wonderingif this is just a bad belt if so what do i look for on the belts to determine if they are bad thank you.

Spray some WD40 on each belt (with the engine idling); if the squeak goes away, you found the culprit! It may only need to be adjusted.

Ryoma-kun 03-07-2009 11:38 AM

Does the squeaking noise disappear when if you engage the clutch?

shaunv74 03-07-2009 11:58 AM

Mouse in the house? :dunno:

xdj_jdx 03-07-2009 12:27 PM


Originally Posted by Ryoma-kun (Post 2901880)
Does the squeaking noise disappear when if you engage the clutch?

no its still there with clutch in its very faint i think maybe its the pulleys...? i had my mazda dealership check my belts they said they looked fine. im gonna try the wd40 on the pulleys and see what happens. Thanks you guys for the responses!!

EDZRIDE 03-08-2009 12:22 PM


Originally Posted by xdj_jdx (Post 2901941)
im gonna try the wd40 on the pulleys and see what happens.

Spray the belts while it's running.

dirtywrench77 03-08-2009 05:26 PM

the water pump is bad for making noise like that right before it starts to leak.take off the belt and start the car and see if the noise goes away.if it does the take off the pully and look for crusties at the vent hole under the neck.if there's crusties change the pump.its really easy.

DOMINION 03-11-2009 10:43 PM

Could it be his SSV getting stuck like Gomez did? or this guy https://www.rx8club.com/series-i-trouble-shooting-95/ssv-acuator-d-168277/


All times are GMT -5. The time now is 02:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands