Center dash vent: louver slats unhooked
I inserted a smartphone holder into the center vents above the radio (bad idea), and managed to undo whatever moves all the louvers together; now they only move separately. (Don't believe I broke anything that would require a replacement vent, as I didn't hear or feel the "snap" of a broken plastic piece.)
So… anyone know how to fix without removing the radio or taking apart the dash? I read one post that mentioned going in there with a very small screwdriver (the kind used to unscrew laptop screws) or some other small pointy tool to "rehook a pin" (and I will do that), but it didn't go into details on exactly how to accomplish that. Thanks. |
My car came with one vent in such a condition. I just had to look at it carefully and was able to pop it back into place without breakage or marks of any kind. Good luck!
|
Thanks! Will put on my hands-free flashlight, grab an eyeglass screwdriver and see if I can fix it.
|
After dislocating one of mine, I wasn't able to fix it from the outside until I took my dash apart of another reason, and figured out how it all hooks together with the piece out of the car. I have no idea how to convey this info with words though. It's about 8 screws to get the whole center console apart and pop the vent box out. Try that?
|
^ Thanks, if I can't fix without taking dash apart, that'll be plan B.
|
All times are GMT -5. The time now is 11:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands