RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Trouble Shooting (https://www.rx8club.com/series-i-trouble-shooting-95/)
-   -   airbag light (https://www.rx8club.com/series-i-trouble-shooting-95/airbag-light-176112/)

rx8james89 06-12-2009 05:20 AM

airbag light
 
I was driving my rx8 at speed the other day an the airbag light came in the middle of the rev counter, I tried putting it on the computer to reset the Ecu but still no luck is there any way to reset the error as I don't really want to take it to mazda and get charged £80 an hour.

Stenobeth 06-12-2009 12:52 PM

I was at the dealer today to ask about my light -- which is on because I swapped out my cloth seats for leather -- and they said disconnecting the battery and reconnecting will reset it. It didn't work for mine but that's because of the seat swap (I need resequencing or something) but if you're just looking to reset, that may be all you have to do. Worth a shot, easy to try! Good luck :)

rx8james89 06-12-2009 01:16 PM

I've tried disconnecting it still no joy its not as bad when I'm on my own but when someone sits in the passengers side it stays on constantly think I'm gonna have to take it to mazda.

expo1 06-12-2009 01:38 PM

Have you tried disconnecting / reconnecting the plugs under BOTH seats?

bulletproof21 06-12-2009 03:47 PM

same thing happend to me. It would be on again / off again for several weeks. Took it to Mazda and there was a shorted wire in one of my seats where the side airbags are. Cost $85 bucks.

rx8james89 06-14-2009 06:47 AM

Haven't tried that yet, if not for the sake of £50 could be worth just taking it to mazda and getting it fixed thx for the help everyone.

DeViLbOi 06-14-2009 07:29 AM

There is also rumored to be another connection behind the glove box for the pass. airbag that comes loose. Normally just disconnecting and reconnecting both seat connections takes care of it though.

dennisgtofan@msn.com 06-24-2010 10:35 AM

does it mean your airbags don't work when the dash light is on?

saad84 07-11-2010 02:52 PM

i would like to know that answer
 

Originally Posted by dennisgtofan@msn.com (Post 3612862)
does it mean your airbags don't work when the dash light is on?

???

phey_05 08-11-2011 09:46 AM


Originally Posted by Stenobeth (Post 3066746)
I was at the dealer today to ask about my light -- which is on because I swapped out my cloth seats for leather -- and they said disconnecting the battery and reconnecting will reset it. It didn't work for mine but that's because of the seat swap (I need resequencing or something) but if you're just looking to reset, that may be all you have to do. Worth a shot, easy to try! Good luck :)


Hi,

Did you manage to take off the airbag on the driver and passenger seat without blowing it? is there an independent sensor inside that airbag? im planning to replace my seat cover, but im a bit worried if i have it replace, the airbag will blow-up.

Or?

it wont be affected since the connectors are not connected and there's no power/sensor connected to it?

if there's any written procedure how to take off those airbags, it will be highly appreciated...

Thanks

SYKOTIKKUSTOMS 08-11-2011 05:35 PM

mine just came on yesterday????

phey_05 08-11-2011 09:07 PM


Originally Posted by SYKOTIKKUSTOMS (Post 4053359)
mine just came on yesterday????


?????

SYKOTIKKUSTOMS 08-12-2011 07:29 AM

air bag light
 
My air bag light decided to come on out of the blue...so when I start the car it blinks for a few minutes and then stays on



Originally Posted by phey_05 (Post 4053452)
?????


EDZRIDE 08-12-2011 10:58 AM


Originally Posted by SYKOTIKKUSTOMS (Post 4053635)
My air bag light decided to come on out of the blue...so when I start the car it blinks for a few minutes and then stays on

Try this: https://www.rx8club.com/showthread.p...=air+bag+light

HiFlite999 08-12-2011 11:37 AM


Originally Posted by phey_05 (Post 4053044)
Hi,

Did you manage to take off the airbag on the driver and passenger seat without blowing it? is there an independent sensor inside that airbag? im planning to replace my seat cover, but im a bit worried if i have it replace, the airbag will blow-up.

Or?

it wont be affected since the connectors are not connected and there's no power/sensor connected to it?

if there's any written procedure how to take off those airbags, it will be highly appreciated...

Thanks

http://freeservicerepairmanual.com/a...repair-manual/

Generally, it's a bad idea to work on this car with the battery connected, but especially so when it involves the airbag system.

Wingznut 08-12-2011 12:54 PM


Originally Posted by HiFlite999 (Post 4053815)
Generally, it's a bad idea to work on this car with the battery connected, but especially so when it involves the airbag system.

Definitely disconnect the battery when working on the airbag system. That being said, while I haven't seen an RX-8 schematic specifically, every other system I've worked on requires two sensors to simultaneously sense a crash to activate the airbags. Otherwise, a single sensor malfunction could cause disastrous events.

jsudz08 10-31-2011 08:47 PM

My light is also on, the code says something about the passenger airbag, the one above the glovebox. I was curious if anyone knew which connector was for the airbag? It's kind of tight under there and I just want to make sure I check out the right one.


All times are GMT -5. The time now is 09:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands