RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Trouble Shooting (https://www.rx8club.com/series-i-trouble-shooting-95/)
-   -   Acceleration issue (https://www.rx8club.com/series-i-trouble-shooting-95/acceleration-issue-189621/)

rx78840 01-19-2010 06:34 PM

Acceleration issue
 
It's been about 2 months now with my 04 rx8 mt with 46k miles stock. Just this week i noticed when im accelerating hard from first to second gear around 8k rpm's my car seems to choke, then proceeds after that it still seems to struggle getting up to high rpm's.... It's really noticeable so I'm pretty worried it could be something bad...Any ideas?

Tweek 01-19-2010 07:23 PM

What do you mean by choke? kind of hard to tell without seeing it

rx78840 01-19-2010 07:26 PM

well it is hard to explain it.... it stops accelerating for a split second when it hits about 8k rpm's. but then resumes.

rotarykillz 01-19-2010 07:35 PM

plugs/coils/wires/air filter

don't start worrying until you've checked all those first.

rx78840 01-19-2010 07:51 PM

Got you... i've been saving up for those... im 99.9 percent sure last owner didn't care about the car and its needs...

invasion08 01-19-2010 07:55 PM

If the coils and spark plugs have not been changed yet i would start there. I would change the ignition coils, spark plugs, and spark plug wires. Dont worry anyway The cat converter is covered for 8yr 80k miles and the engine is cover for 8yr 100k miles

invasion08 01-19-2010 07:59 PM

Depending on your budget i recommend BHR Ignition Kit http://blackhaloracing.com/products-...tion-system15/ $557 w/spark plugs. The oem coils have been know to fail

Pico 01-19-2010 10:49 PM

Sounds like your cat is going.
Are you getting a blinking CEL while accelerating or in 6th under full load? If you then you got a misfire --- plugs/coils/could do the wires to

rx78840 01-20-2010 08:09 AM

Nope no CEL

MTspeeds1 01-21-2010 03:17 PM

Im kinda having the same problem, ever since I changed my air filter it seems like my car isn't accelerating as fast as it used to

Pico 01-21-2010 09:49 PM

How hard are you running the car when happens?
It could be the begin of a CAT failure or clutch slippage from heat generated while running hard

MTspeeds1 01-21-2010 09:56 PM

for me it feels like my car is dragging even from 1000 to 4000 rpm

Pico 01-22-2010 08:19 AM

^ I think your feeling the lack of torque in the bottom part of the power band. The car is a dog til about 5500 rpm

GRrx8 02-06-2012 01:16 PM

im having the same problem but 05 shinka plugs wires n coils rnt bad but its a slight hesitation n 1st going to second got new fuel pump on the way hopefully it fixes it if not then its $100 on new plugs

GRrx8 02-06-2012 01:27 PM

im also having another problem with my 8..... about 5 months ago blew the internal gaskets got them replaced along with the externals shop installed motor n cranked it up but then the idle started to bog up n down n then itll shut off i have to keep the idle up wen ever i come to a stop otherwise the car will bog and shut off, and i am fucking tired of having to do that cus its wasting alot of gas having to keep the idle up..... the shop ran a vacum test passed then a injector test passed too then scaned it said plugs changed em out still did the same thing changed the air filter out n fixed it for about a day n half but then started doing it again looked everywhere on the web about the problem friend said egr valve but dont have one on the 8, another friend said it could b the fuel filter so i bought the whole pump assembly so hopefully its that, web also said it could b the baro pressure sensor but idk gotta wait till the pump is in do yo9u guys have any input on wat the problem could be

zoom44 02-06-2012 02:11 PM

you had your engine rebuilt and it hasnt run right since?

GRrx8 02-07-2012 07:18 AM

yup its been that way since its been rebuilt

bladeiai 02-07-2012 08:30 AM


Originally Posted by GRrx8 (Post 4183537)
yup its been that way since its been rebuilt

What did the people that rebuilt it say when you asked them about it?

GRrx8 02-07-2012 01:03 PM

they scanned it and it said something about the map n something else but i dont remember but i replaced the map and the shit still did the same thing

200.mph 02-07-2012 01:44 PM

who built it? i would not be happy. what parts did they replace?

zoom44 02-07-2012 05:25 PM

what map?

GRrx8 02-08-2012 01:40 PM

this lil mom and pop shop by my place. my bad i meant mas. if you read my post it said internal and external gaskets and plugs


All times are GMT -5. The time now is 10:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands