tranny issues. Too Weak....
 

I did a search and never found what I was looking for.

Anyways, yesterday I was taking off into traffic. I started easy enough in first, pulled second pretty hard, and then tried to put it in third and it wouldnt go so I resorted to 4th and then tried all the rest after I was coasting at about 25mph. It was like the clutch wouldnt disengage. So I stoped turned it off and put it in second and then started it. It kick fwd a bit and then it started and I took off. Then it got even weirder, I pressed in on the clutch and it was still engaged. the rpms never dropped. After that I nursed it home. Then today it woudl disengage and shift okay enough thru all gears but the tranny sounds shot and it feels like I have the e-brake half on and a little ft man shaking my tranny around in the mounts. I know I need to get it in the shop, but any clue what is the exact cause??

any reply is appreciated

bambam

shift fork bent or broken

muchos gracias 44

bambam

could be synchros too. but i still bet on shift fork(s). also you should make sure they check the pressure plate bolts. there have been a couple of instances of them backing out. incorrectly torqued at the factory

thanks again, ill be sure and tell them to check it(pressure plate) out for me
bambam