tail light led wire?
ok so i got my taillights off and took out all the bulbs but theres this one wire thats right next to the turn signal light that wont come out, its not a bulb but i think its the led running lights or something, how do i take this off without damaging the light
|
Originally Posted by pledpled12
(Post 3725861)
ok so i got my taillights off and took out all the bulbs but theres this one wire thats right next to the turn signal light that wont come out, its not a bulb but i think its the led running lights or something, how do i take this off without damaging the light
|
i wanna spray tint the covers
i cant get that wire off |
just tape them up if you're worried about it. they don't come off and you cannot remove the lenses anyways without a lot of work.
|
I would suggest using a precut layover film, like a window tint but thicker. However, if you're dead set on removing them, here's the DIY:
DIY : Remove/Replace Rear Combination Light(Tail Light) https://www.rx8club.com/series-i-do-yourself-forum-73/diy-remove-replace-rear-combination-light-tail-light-114910/ Also: E-How: How to Tint Tail Lights With Window Tint http://www.ehow.com/how_4886112_tint...ndow-tint.html DecalFX.com Tail Light Tint http://www.decalfx.com/smoked_tail_light_film.html |
Also, precut Mazda RX-8 Tail Light Tint from RVinyl.com
http://www.rvinyl.com/tail-light-tin...-RX-8-2004.htm |
depending on the experience level of the installer of that film, you may not end up with the results you want on the back lights. the compound curves make it difficult to install.
|
Originally Posted by nuke0907
(Post 3726214)
depending on the experience level of the installer of that film, you may not end up with the results you want on the back lights. the compound curves make it difficult to install.
|
i have tint film i got from rotaryfx.com
i took it to a local shop and they were gonna charge $147!! so i sold my tints to a friend with an rx8 who was willing to spend that much on his car. I went to Advanced Auto Parts and purchased VHT nightshades tinting spray and saw many videos on youtube of people tinting their taillights. I made $10 dollars more than i paid for, for the tints from my friend, i bought one can of the tinting spray for $12.99, $9 micro fiber pads, and some magueirs ultimate compund ($14). I had some 2000 grit sand paper in my garage along with a few other things i need for the process. So i made $10 off the film and spent $36 on materials, but since i made $10 lets say i spent $26 In all i spent $26 instead of $147 i think it was a smart decision |
Yeah, but you ain't done yet....and we don't know the results.
Time is money, we shall see. Good luck! |
I went ahead and purchased the light smoke kit from DecalFX, with the squeege and the adheasive stuff.
Mazda RX-8 2004 - 2007 Tail Light Tint Tail Light Shade: Light Smoke Squeegee: Yes Application Fluid: Rapid Prep Rapid Tac and Rapid Clear Film Type: Tint $7 for shipping seems a bit high, total $54.96 Will post up a product review when I get home to put it on. ;) |
The tint is overall better then spray, you just have to take your time... as in for our rears possibly 1-2 hours per light. Patience pays
|
ill post pics by tonight hopefully =)
|
1 Attachment(s)
what do you guys think?
|
All times are GMT -5. The time now is 08:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands