sohn adapter tanks
 

so I am going to get the sohn adapter soon and I am curious what other people use to hold the oil. I don't want to use the windshield washer fluid bottle, and most breather tanks are too small.

Look for HHO reservoir on Ebay.

There are several threads regarding this.

Check this company out:

http://www.usplastic.com/catalog/ite...3334&catid=578


if you order from this company you can also get a lid that is vented to prevent vacuum

Make sure you get one that is tall and thin so you don't get oil starvation during hard cornering. I would not use a large tank though. It's kind of overkill IMO. Get a small, thin, metal tank with a level indicator. Done and done. An oil catch can with a cap would serve nicely. Make sure the tank has a hole or filter to depressurize.

thanks for the help... I think I will probably go with the 4 quart us plastics bottle with a vented cap

but I don't think these bottles have outlets... which brings up another question, what is a good way to get the fluids out of the bottle

really...... I mean thanks for the link, but don't you think I searched. I mean it takes a good hour or more just to sift through all the bs to find anything useful

https://www.rx8club.com/series-i-do-yourself-forum-73/diy-sohn-tank-under-air-box-213640/
https://www.rx8club.com/series-i-tech-garage-22/sohn-omp-ideas-183453/

another
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-reservoir-richard-sohn-adapter-225143/

in other words: