rx8 shooting flames?
hello, i know this topic has sound familiar to all. but as far as i research everyone that owns an rotary engine car there are able to make their cars shoot flames.
in this case i have an 05 rx8 a/t an i deleted the cat n put straight pipes 2.5" but the car still dont shoot no flames at all. is there a reason for this? :banghead: |
1 Attachment(s)
I own a 6 port auto, so RPM's might change. I have the full TurboXS exhaust with AP tuning. Make sure the exhaust is hot.
What I do: -Run the engine up to 7500 RPM's in 2nd or 3rd gear (under load) -Put in neutral, let the RPM's fall to 6500 RPM's -Rev back up to 7500 RPMS (still in nuetral) -Stab the gas pedal at it hits 6500 RPM's again It literally sounds like a shotgun blast. Cause: Attachment 245844 |
get a proper exhaust
|
just keep bouncing the needle at redline, works for me all the time
|
Originally Posted by mushkid
(Post 3961261)
get a proper exhaust
You probably are shooting flames, you just have to drop the throttle just right, it takes a little practice. There are videos of people shooting flames really easily and usually it's because they have a rich tune on the Access Port. :cool: |
You must be very frustrated to start a thread like this.
|
Originally Posted by BlackRX82006
(Post 3961252)
I own a 6 port auto, so RPM's might change. I have the full TurboXS exhaust with AP tuning. Make sure the exhaust is hot.
What I do: -Run the engine up to 7500 RPM's in 2nd or 3rd gear (under load) -Put in neutral, let the RPM's fall to 6500 RPM's -Rev back up to 7500 RPMS (still in nuetral) -Stab the gas pedal at it hits 6500 RPM's again It literally sounds like a shotgun blast. Cause: http://i188.photobucket.com/albums/z...Force/Fire.jpg thanks for ur method, will try it. |
Originally Posted by bse50
(Post 3962684)
You must be very frustrated to start a thread like this.
|
Originally Posted by dozer
(Post 3961284)
just keep bouncing the needle at redline, works for me all the time
i don't wana screw up my engine |
if he is running a stock exhaust, he wont get the nice big ol flames. he needs something with a less restrictive airflow, hence why i said you need a proper exhaust.
and +1 on the AP
Originally Posted by 8upbad
(Post 3961290)
-1, How can you tell him that his exhaust isn't any good. And how could that be the reason he isn't shooting flames....?:scratchhe
You probably are shooting flames, you just have to drop the throttle just right, it takes a little practice. There are videos of people shooting flames really easily and usually it's because they have a rich tune on the Access Port. :cool: |
Originally Posted by mushkid
(Post 3962738)
if he is running a stock exhaust, he wont get the nice big ol flames. he needs something with a less restrictive airflow, hence why i said you need a proper exhaust.
and +1 on the AP |
i tried to pop flames once with an AP Midpipe and a stock exhaust, all i got was baby flames lol.
Originally Posted by 8upbad
(Post 3962745)
Well he said he was catless. A full exhaust would shoot more fire but I had no problem with a stock exhaust catless.... I think it's just technique but a better exhaust wouldn't hurt. :)
|
Originally Posted by mushkid
(Post 3962759)
i tried to pop flames once with an AP Midpipe and a stock exhaust, all i got was baby flames lol.
|
There is a thread about "pop flames" in here somewhere. Too lazy to search. In there, you'll see rx8's shooting pop flames and info on how it is done, check it out.
|
Originally Posted by 8upbad
(Post 3962793)
ok yeah, they are baby flames....:rollinglaHere's a video of mine when I was catless.... http://www.youtube.com/watch?v=nsETtYS0t6w
|
|
Originally Posted by insanerx8
(Post 3963173)
What kind of exhaust so u have now?
|
Laythor... I remember when you first posted that vid... Epic!!!
|
flame on!
|
|
Originally Posted by 8upbad
(Post 3963200)
Back to stock.... it sucks, I had the exotic speed mp and the HKS high power and I loved it, but I needed the $ and I got a ticket for being too loud. :tear:
|
This thread makes me wanna cry.
|
^.................+1
The amount of stupidity and total disregard for the English language in here is astounding! I'm just saying. :) Carry-on. |
https://cimg5.ibsrv.net/gimg/www.rx8...33d53d3b1.jpeg
https://cimg7.ibsrv.net/gimg/www.rx8...8eb1f7f7c2.png https://cimg9.ibsrv.net/gimg/www.rx8...7e3961fbc9.png Whats always worked for me is warm it up, rev to about 3k and hold, push to 5 k for about 4 seconds then full throttle, before red lining let off, then rev back up to red line and keep bouncing the needle. If u get really good you can time the pop and rev it right before to make an even louder and bigger flame. I only have these small flame pics for now. |
No flames....
I recently had a resonated down pipe and a whole next car back exhaust installed any ideas what is holding me back it’s a 2011 base rx8 https://cimg8.ibsrv.net/gimg/www.rx8...9dde1aebcf.png |
All times are GMT -5. The time now is 01:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands