Project "Bad Ass RX-8" is on...
5 Attachment(s)
After 7 Years It starts tonight!
My son has now became all grown up and got his license. He wants a car, and he doesn't just want any car. He wants to get my 8 back up and running. What father wouldn't want to share something like that with his son - A project that will create memories, bond, and provide experience to the young one that will last forever? So we towed the 8 from where it was stored to my garage and began preparing for the project that we code named "Bad Ass RX-8". This project will include: Complete engine rebuild: Motor will be taken out and disassembled. We will asses the amount of damage and then order the necessary replacement parts. Spark plugs cooling mod applied Street porting Install new clutch Install a set of BHR ignition coils 1000cc Primary injectors Rebuilt the turbo: New turbo manifold and downpipe (Built from scratch as always :smoker: ) Reconfigure intercooler tubing Relocate the battery New HDI-EBC-R Electronic Boost controller 2x 12' fans will be strapped on the intercooler for better charge cooling at low (street) speeds New Exhaust: Haven't decided yet on which one to go with, but it's coming And probably more cool mods as we progress along... Media: (Hurry up subscribe, Like, follow, bookmark and share) :Peace: Project progress will be video documented and videos will be posted onto my youtube channel here: https://www.youtube.com/user/rotorrocks I am also launching a website: http://www.badassrx8.com (Coming Soon) Facebook Page: https://www.facebook.com/badassrx8 Instagram: http://www.instagram.com/badassrx8 Updates: :smoker: Timelapse Videos on YouTube: Day 1 Timelapse: Day 2 Timelapse: Day 3 Timelapse: Day 4 Timelapse: Day 5 Timelapse: Also stuff has been posted on our Instagram :Peace: |
Good luck man, liked and subscribed.
|
Updated the OP
:Peace: |
Updated the OP with day 4 and day 5
|
Update:
Day 6 Timelapse |
Update: Reviewing the exhaust
|
Hey Man look nice !
How much do you think, your project, will cost in total !? |
Originally Posted by olivierapex
(Post 4710999)
Hey Man look nice !
How much do you think, your project, will cost in total !? Now that we pulled the motor and took it apart i found it to be a huge bust. Rear rotor even though it appears intact has the side seals seized in. Thrust bearings are trashed, so is the pressure plate, bearings are destroyed, I may need to replace the rear housing.. i don't know. I have not done full damage assessment yet but it appears that motor has overheated and seized. but I may need to drop another 1500 if not more on replacement parts. We are taking the time with it. I want to do it right, so there is no rush. |
This is nice. Any chance of getting a better camera for the vlogs?
|
Pretty cool. Not a lot of kids anymore get this level of technical knowledge + bonding!
|
+1 for you there dad.
I agree with fullboost, not many kids these days get any kind of mechanical knowledge or quality time with their parents. Seriously good job. Keep up the good work. Travis |
Originally Posted by Williard
(Post 4717906)
+1 for you there dad.
I agree with fullboost, not many kids these days get any kind of mechanical knowledge or quality time with their parents. Seriously good job. Keep up the good work. Travis Appreciate the good words! :yesnod: Sorry for not posting anything in a while. We had a major set back in the build. After the engine was pulled and taken apart, I found that the thrust bearing was completely annihilated and the motor seized. A complete mess. Shavings everywhere, journal bearings destroyed, the thrust flange is literally fused into the shaft and i can't even take it off. :wallbash: Long story short, We had to backstep and wait to put together finance for a replacement motor, which I just ordered from OjImports today. :ylsuper: The engine will be a custom build with street porting and RA apex seals for a little more resistance to a ping. Once it comes in, I will resume the posts and the vlog, so stay tuned! :smoker: |
Oh I'm rather jealous, haha. Hope you two have one heck of a time together with it. :)
|
Just found your blog. Pretty cool, waiting for more.
|
More Developments
More Developments :rock::
1) 2) 3) 4) 5) 6) 7) 8) |
Originally Posted by SayNoToPistons
(Post 4717221)
This is nice. Any chance of getting a better camera for the vlogs?
|
Yeah good luck mate.
Just remember you are 1 step closer each day to the finish line.... :) |
Where does this connector gets connected.
For the life of me I can't find where does this thing gets plugged in.
Any suggestions? I've spent half a day trying to find it. :dunno: :wallbash: https://cimg4.ibsrv.net/gimg/www.rx8...e2fde8596.jpeg |
Never mind...
I figured it out. Oxygen sensor which I removed and replaced with aftermarket one of EGT gauge... Waisted all this time :cussing: |
New video is up on youtube
Facebook Page: https://www.facebook.com/badassrx8 Instagram: http://www.instagram.com/badassrx8 |
Keep up the good work guys.
Father of the year type stuff happening here. Travis |
Originally Posted by Williard
(Post 4742956)
Keep up the good work guys.
Father of the year type stuff happening here. Travis Here is the latest: |
Awesome thread, good for you guys
|
Couple More videos:
Installing turbo: Relocating battery: |
Your oil line looks very exposed under there .....
What are you doing about oil circulation ? |
All times are GMT -5. The time now is 08:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands