Nipple plugs (end caps). What are you using?
 

I have a catch can and that requires nipple plugs (end caps). The packs I get from AutoZone don't hold up for more than a season before they start cracking and leaking, resulting in massive vacuum leaks. What do you use for nipple plugs that doesn't degrade within a season?

OH SHIET?...

the nipple thing that you put under the TB when you install a CAI?

MAYBE THATS WHY IM GETTING A P0111... because its cracked.....

MIND BLOWN..

id like to know where to get a quality one then too.

same here. i have the variety pack from vatozone too. i usually check every couple months or so to see if they crack (which they do)

I'd say go with silicone vacuum caps. Never had a problem with the silicone cap I used to cap off the VFAD nipple, its holding for 2 years now and no vacuum leak. Its helpful if you put a thin layer of black RTV around the outside edge of the nipple then slide the cap over.

I've had better luck with PVC vinyl tubing with the ends heat crimped shut. Looks horrid, but they lasted longer than the rubber vacuum caps I've used. Will try silicone vacuum caps next.

I remember McMasterCarr sells some good ones, or u can grab a load from Digikey.

get the ones made with EDPM rubber,


rofl, those autozone ones, I remember I got it once and I returned it 1/2 hr later ------ cuz one of the cap ripped the FIRST time I tried to use it LMAO.

McMaster-Carr

here ya go :D

Thankkkssssssss :)

do you have the exact part link? just want to make sure i get the right one the first time.:smoker:

i forgot the exact size, just take a good guess :)

Or just buy OE nipples like the ones on the LIM

Part No. 1010-13-104 CAP,BLIND $3.88 MSRP


.