need info with repairs
 

wtf are you talking about? what front seal? t stat housing and oil metering pump are two different parts. if you mean apex seals and its out of warranty you over paid. what year? shift knob could be motor mounts

shakes , or slightly vibrates when you touch is normal

read up
FAQ’s https://www.rx8club.com/new-member-forum-197/rx-8-faq-please-read-before-posting-959/
New and Potential Owner’s, Start Here https://www.rx8club.com/new-member-forum-197/new-potential-owners-start-here-202454/
Congratulations, you got an 8 https://www.rx8club.com/new-member-forum-197/congratulations-you-got-8-a-202548/
New Owner FAQ’s https://www.rx8club.com/showthread.p...&highlight=FAQ

Also, make sure you read the “stickies” in each sub-forum

all i kow is they said i need to replace the front engine seal and i think its the metering pump, its what regulated the engine coolant and i need it replaced because its leaking coolant, and also resulting in a radiator smell

Jesus man, you need to read up. You have no clue what you are talking about. The oil metering pump has nothing to do with coolant and it is located on the bottom front of the motor, the thermostat housing is on the front top of the motor. They are part of two completely separate systems.

It sounds like we have another case of someone buying an RX-8 without doing any research.

another one of those "SPOON FEED ME IM A NOOB!" loser.

In a nutshell, you need a replacement engine.
Link to remanufactured Renesis thread: https://www.rx8club.com/mazmart-88/remanufactured-rotary-engines-104255/

About $3000 for the engine (you need to send core back) and then labor charge to replace motor.

I'm guessing about $5000-6000ish in total?

Who is the "they"? Mazda dealer? Gas station? Rotary specialist?

If it was a dealer or a rotary specialist, and they didn't give you a written rundown, contact them and ask what they said. Sounds like you just got the info scrambled.

Kind of to be expected as 8s get older and move down the used car food chain. And it sounds like Joel just mis-heard whatever "they" told him, and can use some help once he gets it clarified.

Ken

or its a blown motor that blew a water seal at minimum

no i just have an oli leak and mazda is saying i need the front seal replaced

So it's leaking coolant or oil? or both?

its leaking both so they say i need to replace the front seal which im guessing is for the oil and i need new thermostat hoses which i think if for the hoses. and yes people i know im new and i look dumb but thats why im trying to learn. thank you for all positive feedback.

i meant to say..they say i need to replace the thermostat hoses which im guessing is for the coolant leak

Front seal = need to rebuild the engine.
You paid 11-12k for a car with 60k. Congrats!

why would you need to rebuild the engine for that??? its just a seal

Because you have to tear it down to get to the aforementioned seals maybe

why? because you are a moron, no research/homework and you bought a car.

so yeah, again, you are a moron.

Hey joel.andrews1992,
I hope you realize that you purchased a car with a Wankel motor.
There are essentially 3 types of seals in the rotors. The Renesis has two of these rotors.
The rotors are INSIDE the engine housing.

This means you have 2 main options:
* Remove motor, crack it open, replace the seals, put the motor back together, then into your car.
* Order reman motor, remove old motor, insert new motor, then send old motor.

I think the second option probably is quicker and cheaper.

Great info dynamho.
But, just to keep this thread on topic
http://www.planetcalypsoforum.com/ga...1/facepalm.jpg

lol

i sorta feel sorry for the guy.
he thought it was a great deal on a cool car...
talk about a hard knock.

He did not need everyone pounding on him the way they did. I'm kind of embarrassed to be part of this thread.

Joel - if you have not been put off this forum, see if you can get a clear description of what the dealer told you, and a their cost estimate for what they say needs to be done. There are folks here who can help you figure things out, given specific info.

Ken

Yes.
Some of us can help you address the situation, if you decide to keep the car and work with it.

There is a lot of information here, along with a LOT of noise to sift through. You will need to be steel faced at first, but that's part of any initiation process. Good luck man.

Well, the community didn't deserve the bunch of stupid replies he gave when instructed on what to do...
"It's just a seal blah blah".
Stubborn members make for funny threads though, the only reason why this place is still somewhat entertaining :(