Originally Posted by houstonrx8er
(Post 4466201)
But the alt load is consistent and doesn't change with draw. It always takes 2.3hp to run it :D
Shady will get it :lol: Typical ... |
2 Attachment(s)
Originally Posted by myzon26
(Post 4516476)
Good write-up the pics are great! One question though, I am having a problem finding which wires go to which wires. I have read (through exhaustive searching) that wire colors are not always the same. I seem to have the same wire colors as you do(coming from the harness and off the fans) which wires go with the red and black wires off the harness? The only thing I have managed to scrounge up says that the red from the harness is actually a ground.
This from my 2004 Wiring Manual. HTH. |
Only 1of my cooling fans are working. The connector is burned up. how do i fix this problem?
|
Fan #2? And your fan might be burnt too not just the connector. Read the beginning of this thread and replace your factory fan pack with a fal. @lflood
|
My fals are still going strong.
|
Originally Posted by 1.3_LittersOfFurry
(Post 4625307)
My fals are still going strong.
|
All times are GMT -5. The time now is 09:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands