Injector questions
Hi Guys,
I've been reading through the site for a while now, but this is my first post. I have recently purchased some Injectors i'm told are from a RX8, i've searched around the net and your forum and found that the high powered RX8 has either 390cc secondary's and 280cc primary injectors sizes. Unfortunately the guides i found so far did not give the injector part numbers though. The one's i bought are 195500-4450 witchhunter.com list them as 425cc injectors, but i can find no reference to them on your forum. What i would like to know is. a/ Are these Injectors from a RX8, if so which model b/ Has anyone actually had these type Injectors flow tested, as the manufacturers specs and actual specs are often very different with Injectors. Thanks in advance. Cheers Mark |
The RX8 uses the 390/280 so by running the 425 the car will run rich unless you have a method of adding/removing fuel (tunning with greddy emanage, interceptor, afc).
|
I don't have a RX8 i have a Miata, with Emanage Ultimate so i am able to control the bigger injectors no problem.
I have no problem with the setup and running of my car, I'm just curious :) I ran 195500- 2010 RX7 460cc's previously, but the 195500-4450 Injectors improved the tickover and driveability a hell of a lot. I would just like more info regarding which car they came from and if anyone has flow tested a set to see how the figures compare to stock. Cheers Mark |
Contact Rich at Cruzinperformance.com with your questions. He can probably answer them.
|
Thanks.
I've just sent them an Email. Cheers Mark |
All times are GMT -5. The time now is 07:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands