Originally Posted by RGT84
(Post 4872889)
. The OMP on any rotary engine can not work correctly being fed by just gravity. It has to have oil pressure. It is technically not a pump, it is merely a valve that meters the high pressure engine oil. .
https://www.rx8club.com/series-i-tec...cation-268559/ |
Originally Posted by Brettus
(Post 4872890)
|
Originally Posted by RGT84
(Post 4872891)
Interesting read.... Perhaps I should have done a tad more digging before opening my mouth instead assuming the Renesis OMP worked the same as previous rx7 models assuming your data is correct. I stand corrected sir.
|
RX7 pump
Compare with pic on first page (of the linked thread) ...design is the same : https://cimg8.ibsrv.net/gimg/www.rx8...34c13344be.jpg |
Originally Posted by Brettus
(Post 4872892)
If you check the design of the rx7 pumps ...it's the same . Only difference is there are 2 pumps not 4 .
https://www.rx7club.com/3rd-generati...-premix-60867/ |
Originally Posted by RGT84
(Post 4872894)
Have you read this thread :
https://www.rx7club.com/3rd-generati...-premix-60867/ |
Originally Posted by Brettus
(Post 4872895)
Just did .... Seems that guy didn't fully understand how it worked ;)
|
I've since updated my pre-mix to 8oz per fill-up, or roughly 0.5oz of oil to 1 gallon of fuel. No smoke or excessive fuel trimming, so I'll stick with it for now.
As far as the SOHN, it seems to be pumping an effective amount of oil. It injected about 32oz during the first 1,000mi break-in. It will be interesting to see what it does over the next 1,000 miles of normal driving. |
Originally Posted by NotAPreppie
(Post 4870185)
http://a.co/d/dVl0hsT
http://a.co/d/8UsPsXW Both: API TC, JASO FC & FD, API EGD JASO FC = ISO EGC JASO FD = ISO EGD https://www.motor-talk.de/forum/akti...hmentId=683876 JASO FD = ISO EGD Got it, Thanks! |
what about upper cylinder lube lucas?
|
Since you guys brought up the sohn adapter, I recall someone on here telling me the sohn adapter leaves some areas of the engine unlubricared. Can you guys elaborate? Something like sohn kills track engines or something for lack of complete lubrication. I was searching for my post and his response but am having a hard time locating it.. I didn't see these replies. I though rx8club wrote me off for flicking the bird
|
Lots of people say lots of things. The Sohn isn't changing the injection pattern or volume from stock, it only changes what is injected. Premix should get oil into places the stock injection system can't, like side seals.
|
Originally Posted by Loki
(Post 4872917)
Lots of people say lots of things. The Sohn isn't changing the injection pattern or volume from stock, it only changes what is injected. Premix should get oil into places the stock injection system can't, like side seals.
|
I'm not kidding.
|
damn
now i have another item on my shopping list... |
what do you guys think about the olddragger mod with the tranny cooler as a secondary radiator? I thought that was genius but i fear the car may run too cold. thoughts?
|
As long as it's thermostat- controlled, it won't run too cold.
|
Originally Posted by Loki
(Post 4872917)
Lots of people say lots of things. The Sohn isn't changing the injection pattern or volume from stock, it only changes what is injected. Premix should get oil into places the stock injection system can't, like side seals.
|
All times are GMT -5. The time now is 06:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands