Help with scan data from torque pro
 

Used my torque pro app today as I've got a fault and these are the two things it throw up.

Mid $bo tid $99
Min 25.197% max -74.383%
Current -79.938%

Mid $fo tid $ cc
Manufacturer defined mid
Min 8,273 max 4
Current 52.464

I have no clue what any of that is supposed to mean. Is there a DTC?

You ran "Vehicle Test" that's why you are seeing that. Torque doesn't store manufacturer specific pids. These two are the only ones without a description.

So can I take Paimon that as pro torque doesn't hold manufacturers pids that there may not be anything wrong on the scan I did ?

big rooster, not quite true.

What are you trying to accomplish? If you have a CEL on, for example, you simply picked the wrong part of the app.

Try clicking the Fault Codes section instead: (randomly grabbed web image to show the screen)
http://www.lotustalk.com/forums/atta...tor-torque.jpg


The vehicle test (often referred to as mode 6 test) can give you a lot of information, but it doesn't always mean anything by itself and none of the tests mean anything without proper Mazda RX-8 specific labels.

Hi thanks for the reply .. I've done a fault check and have a code I'm putting the fault down to air leak or coils but I cleared the fault from the ecu to see if it came back but no return so far but I just put the test scan on just to see what the sensors were reading but when two of the checks came back with a fault I just didn't understand what I was seeing .