help! MS CAI install
3 Attachment(s)
Ok Im trying to install the MS CAI but i got stuck on step 6 "Unplug the vaccum solonoid and vacuum line attached to it."
im just wondering if anyone can help point out to me where these are because im just retarded. i attached some pictures that somebody could use to point it out. some of the picture are of the aem intake but they are practiclly the same so anyone who has installed either would you please help me out. thank you :yesnod: BTW: my car is an 2005 auto if it makes a difference. |
1 Attachment(s)
solenoid
|
the things you speak of are under the stock intake... and in the front of the intake where the vdaf is... if you are going off the photos in the thread you are doomed...
have you removed the stock intake box yet??? beers :beer: |
sorry those were the only photos i could find. i did remove the box but i think i did it too soon and now i dont know because when it came out i saw nothing under it
|
3 Attachment(s)
im having difficulty figuring out which part im supposed to cap. the first picture i found on here and it shows it coming off of the plastic and getting capped.
the second pic is of mine, but mine is smooth all around that area so i have no idea what up :wallbash: . the third one is what it currnetly looks like where my airbox was. |
first photo... the blue cap right in the center of the photo is the place...
beers :beer: |
i understand that is the place but on my car there is no where to place the stopper(see pic 2). i wonder if my car just doesnt have it? what would happen if i tried to install with out doing those steps
|
UPDATE:
ok so i went ahead with the installed the intake and after a few days and a couple of trips including some hard driving everything seem to be fine. and wow the MS CAI has some noise to it :rock: |
All times are GMT -5. The time now is 08:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands