Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

New starter ?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 11-15-2011, 06:54 AM
  #1  
Registered User
Thread Starter
 
jazin's Avatar
 
Join Date: Nov 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
New starter ?

I have RX-8 -2004 manual 5-speed and i need a new starter.

Will this fit to my car and fix the warm starting problem ?

http://www.dealerdirectparts.com/Pro...4337706-RX-8-4
Old 11-15-2011, 10:01 AM
  #2  
Registered
 
StreetGT's Avatar
 
Join Date: Nov 2010
Location: Berkeley, CA
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
fit, yes, help, yes, fix... no.
Old 11-15-2011, 10:45 AM
  #3  
Registered User
Thread Starter
 
jazin's Avatar
 
Join Date: Nov 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
I have new coils and plugs already, so i think the original starter is the problem...

Not a new thing on these -04....
Old 11-15-2011, 03:05 PM
  #4  
No respecter of malarkey
iTrader: (25)
 
TeamRX8's Avatar
 
Join Date: Apr 2005
Posts: 26,719
Received 2,006 Likes on 1,635 Posts
every freaking day ....

https://www.rx8club.com/series-i-do-yourself-forum-73/what-belongs-diy-forum-163653/
Old 11-16-2011, 03:05 AM
  #5  
Registered
 
StreetGT's Avatar
 
Join Date: Nov 2010
Location: Berkeley, CA
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
Worry not TeamRX8, I got his back.

Step one) Purchase New upgraded starter motor.

Step Two) Disconnect battery.

Step three) Jack up the left front side of your car. Make sure to place a jack stand.

Step four) locate starter

Step five) Disconnect the two wires attached to the starter, one is a clip, and one is hiding under a plastic hood type thing.

Step six) unbolt starter from tranny by first unbolting the lower bolt, and then the upper bolt, the latter of which will be harder to reach
Step six *note: If the upper bolt appears to be spinning freely, It probably is because it goes all the way through the transmission to the other side. Hold the other end of the bolt somehow until it is completely unscrewed.

Step Seven) Remove old starter.

Step eight) Install new starter following these instructions backward.

Step Nine) Weep slightly as it dawns on you that you may need to replace your engine.

Congrats your done!
Old 11-17-2011, 05:12 AM
  #6  
Registered User
Thread Starter
 
jazin's Avatar
 
Join Date: Nov 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
What makes you think i have replace engine ? :D
Old 11-17-2011, 02:15 PM
  #7  
Rotary Noob
 
dirkyd3rk's Avatar
 
Join Date: Aug 2011
Location: Houston
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by jazin
What makes you think i have replace engine ? :D
Warm starts dude. If you've changed coils, plugs, and the starter and you still have hot start problems you could be losing compression. I had the same hot start issues after changing all of those and it resulted in a new engine (reman). Check with your dealer to perform a compression test should run around 125-150 depending on the local stealerships pricing.
Old 11-18-2011, 04:19 AM
  #8  
Registered
 
StreetGT's Avatar
 
Join Date: Nov 2010
Location: Berkeley, CA
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
google "site:rx8club.com hot starting"
Old 11-18-2011, 04:37 AM
  #9  
#50
 
bse50's Avatar
 
Join Date: Nov 2007
Location: Caput Mundi
Posts: 7,521
Received 10 Likes on 10 Posts
Check the compression before spending money on the starter. A strong engine with a weak starter will always start.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
92trbolzr
Series I Trouble Shooting
24
07-08-2020 07:59 AM
Luke.s
New Member Forum
4
09-30-2015 05:57 PM
Quiggs321
New Member Forum
19
09-30-2015 05:34 PM
pjwermuth
RX-8 Discussion
5
09-28-2015 11:36 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: New starter ?



All times are GMT -5. The time now is 06:18 PM.