RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Tech Garage (https://www.rx8club.com/series-i-tech-garage-22/)
-   -   Both fans at the same time? (https://www.rx8club.com/series-i-tech-garage-22/both-fans-same-time-227730/)

Highspeed 01-17-2012 11:58 AM

Both fans at the same time?
 
Ok, I know when using a Cobb you can make it to where both fans run together and also control at what temp they come on...however is there a way to do this without a Cobb? I have a scangauge ii and it will send codes to the ECU however I do not know how to do this without a Cobb. Can anyone lend some info on this?

slvrstreak 01-17-2012 12:14 PM

you can get a flexalite variable fan controller

Highspeed 01-17-2012 03:16 PM

Wow...154 bucks for that thing...I am sure there is a way to do this without spending that kind of cash JUST to control your fans. It has to be an ECU setting...I am going to see if there is a way Mazda can tune the ECU to kick them both on at the same time

Thank though sir for your input...its a great idea just trying to spend money wisely on my 8 since two kiddos are who I spend most of it on lol ;)

wankelbolt 01-17-2012 04:42 PM

The Mazsport fan mod did this (activated both fans at once) plus a little more. Raceroots was selling it for a while, but I don't think they are anymore. All it did was activate both fan relays via a separate thermostat in a coolant line.

Get a wiring diagram and you can wire the control line for fan 1 so it turns on both fans (activates both fan 1 and fan 2 relays). If you know what you are doing, it's not hard. If you don't, find somebody selling the Mazsport fan mod. It was $100-150 new, I sold mine for $75 last year.

Silver_Surfer 01-17-2012 04:44 PM


Originally Posted by wankelbolt (Post 4167990)
The Mazsport fan mod did this (activated both fans at once) plus a little more. Raceroots was selling it for a while, but I don't think they are anymore. All it did was activate both fan relays via a separate thermostat in a coolant line.

Get a wiring diagram and you can wire the control line for fan 1 so it turns on both fans (activates both fan 1 and fan 2 relays). If you know what you are doing, it's not hard. If you don't, find somebody selling the Mazsport fan mod. It was $100-150 new, I sold mine for $75 last year.

LOL, I mentioned this mod in the OP's Radiator thread:Wconfused

dannobre 01-17-2012 05:31 PM

http://www.rx8performance.com/produc...an-control-kit

olddragger 01-17-2012 06:31 PM

the flex a lite can be had for much less. Just get the one that has a radiator probe instead of a screw in sender. i think it is around $100. It has many features including temperature on adjustment, soft on, run on, varied speed according to temps etc etc. I am very well pleased with mine. Easy to install also.
The factory set up only has 2 speeds i believe?
.

nycgps 01-17-2012 06:41 PM

Factory has 2 speed. High and low

As far as i remeber the low speed activates at 97 celsius and full/high speed at 101 or 103 celsius.

Dont bother asking dealership to change it for u, cuz they cant. Im willing to bet they dont even know qhat temp its supposed to come on without looking at the fsm.

I like my rb flash ... :-)

Highspeed 01-17-2012 07:10 PM

Racing Beat flash...tell me more please? What is it...how much?

Also, so you are saying I could take the relay wires for the second fan, cut them, wire them into the wires for the first fan...that way when the fan gets the signal to kick on, it would actually kick on both fans...correct?

I like the mod dannobre linked. Its cheaper and looks easy to install.

zoom44 01-17-2012 07:23 PM


Originally Posted by Highspeed (Post 4168091)
Racing Beat flash...tell me more please? What is it...how much?

http://www.racingbeat.com/RX8/Electronics/11307.html

TeamRX8 01-17-2012 08:38 PM

You will only make both the fans and the electrical loading cycle more often

but noobs will be noobs, just like how you didn't search or research the topic properly, the cliff you're standing at might drop farther than you realize ...

nycgps 01-17-2012 09:02 PM


Originally Posted by Highspeed (Post 4168091)
Racing Beat flash...tell me more please? What is it...how much?

Also, so you are saying I could take the relay wires for the second fan, cut them, wire them into the wires for the first fan...that way when the fan gets the signal to kick on, it would actually kick on both fans...correct?

I like the mod dannobre linked. Its cheaper and looks easy to install.

If u think cobb is expensive, then i dont think u want rb. I got it because i was one of the early adopters, way before cobb ap came out. It works fine for me, the tune is pretty conservtive so it wont fuck the car up. But from ur words it seems like u want to do this on a budget. N9thing really wrong with stock fan on temp. As long as u are just doing regular driving and top off ur rad often.

Highspeed 01-18-2012 12:17 AM

TeamRX8...thanks for your post but save your remarks like that man, its a waste of your breath. Thanks nyc for the info. I'm going to order the mod posted above that is quick, easy and works.

tonedef 02-28-2012 12:01 AM


Originally Posted by Highspeed (Post 4168282)
I'm going to order the mod posted above that is quick, easy and works.

I'm curious if you did order the cooling fan mod. If you did how has it worked for you? Curious as to the quality of the product.
Also like to know about your experience with "rx8performance.com". Was your order processed quickly?

juikster 02-28-2012 12:40 AM

1 Attachment(s)

Originally Posted by Highspeed (Post 4168282)
TeamRX8...thanks for your post but save your remarks like that man, its a waste of your breath. Thanks nyc for the info. I'm going to order the mod posted above that is quick, easy and works.

we all work to learn these 8 issues over time regardless how lame the search system works. the paper bag head guy became seasoned, but there was a time back in the day when there was a rookie amonst us.

TeamRX8 02-28-2012 07:19 PM

exactly, but like I said "noobs will be noobs", so I already knew he was going to ignore me before he replied telling everyone so because I walked that path many times before

some simple wiring harness mods so they both trigger at the same time is a lot cheaper than buying some overpriced controller or wasting your money on a Racing Beat flash (wtf would you do that than a Cobb?), but noobs will be noobs

Highspeed 02-29-2012 08:34 AM

Tonedef,

I did order the mod and it works great. Took me about 15-20 minutes to install it and it works great! I have not seen temps get to 200 yet and have ran it hard. The real test will be the Texas 8 run we do the last week of April down around San Antonio. RX8Performace was easy to deal with to get the product and even called me when the post office was trying to tell him the address I gave was invalid. Most companies I have dealt with have just held the part until I called in asking where it was. After I told him the address was good, he shipped it and then even followed up with a phone call asking how the install went and if the product was working as I had hoped. I would definitely do business with him again.

Highspeed 02-29-2012 08:35 AM

Team,

I appreciate your input. If me buying a product to make it easier for me to achieve what I need to achieve and it helps a vendor out by providing business...then by all means I can handle being called a noob. Thanks!

tonedef 03-04-2012 07:48 PM


Originally Posted by Highspeed (Post 4200977)
Tonedef,

I did order the mod and it works great. Took me about 15-20 minutes to install it and it works great! I have not seen temps get to 200 yet and have ran it hard. The real test will be the Texas 8 run we do the last week of April down around San Antonio. RX8Performace was easy to deal with to get the product and even called me when the post office was trying to tell him the address I gave was invalid. Most companies I have dealt with have just held the part until I called in asking where it was. After I told him the address was good, he shipped it and then even followed up with a phone call asking how the install went and if the product was working as I had hoped. I would definitely do business with him again.

Awesome thanks, summer temps in the valley are pretty high here so this would come in handy


All times are GMT -5. The time now is 12:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands