|
Originally Posted by Charles R. Hill
(Post 2110308)
Just thought y'all would like to know; I will now begin production of my Black Halo Racing radiators for the M/T models as well as the A/Ts.
|
Originally Posted by Charles R. Hill
(Post 2110308)
Just thought y'all would like to know; I will now begin production of my Black Halo Racing radiators for the M/T models as well as the A/Ts.
Got a link to a thread or something? I'm interested... Tis the season...heh |
since i am suffering from pyrobovineaphobia--i have to have something to occupy my thoughts. With that in mind i have discovered that the maf wifes that are normally cut for the install do not have to be cut if you use the int x. the int x has a plug in for the i.t sensor that can be attached to the Pettit one in the new uim. The I X defaults to that one. All you need is a regular wire with a jack on it like an earphone wire--then just hook her up!
Also it may be advantageous to reroute the firewall heater hose to the front part of the engine. It takes a lot of heat away from the manifold. OD |
Its been much cooler outside here in Alabama the last week. Everytime I check my manifold after driving it's cool(allmost cold) to the touch.
|
it's my bday today and wha does that mean?
I will be getting a Seibon TS Carbon Fiber Vented hood. I feel like a kid at X-Mas! |
Originally Posted by munche187
(Post 2116788)
it's my bday today and wha does that mean?
I will be getting a Seibon TS Carbon Fiber Vented hood. I feel like a kid at X-Mas! :smiley309 |
Originally Posted by munche187
(Post 2116788)
it's my bday today and wha does that mean?
I will be getting a Seibon TS Carbon Fiber Vented hood. I feel like a kid at X-Mas! |
happy bday roland!!!!!
love the cf gift!!! :djcelebra :suitdance :suitdance :suitdance |
Originally Posted by Bastage
(Post 2106228)
If you need an extra set of hands, let me know.
Back sway was cake, front took a little longer......as I was by myself and getting the bar out and in by yourself takes a little bit. I didn't want to drop the tray, so I just took my time and went from one side of the car to the other about 30 times! No trouble with the endlinks, didn't even have to use the 5mm hex when taking the old ones off. I did have to use it for a short time when putting the new ones on, but it's all good.......no worries! :ylsuper: Only went for about a ten minutes drive and really couldn't throw it into any corners, but those I did take felt really good and stable! I'll push it harder tomorrow, but I can tell it's got less body roll already. :yesnod: |
Originally Posted by Mazurfer
(Post 2116969)
"G"..........I did the sways today!
Back sway was cake, front took a little longer......as I was by myself and getting the bar out and in by yourself takes a little bit. I didn't want to drop the tray, so I just took my time and went from one side of the car to the other about 30 times! No trouble with the endlinks, didn't even have to use the 5mm hex when taking the old ones off. I did have to use it for a short time when putting the new ones on, but it's all good.......no worries! :ylsuper: Only went for about a ten minutes drive and really couldn't throw it into any corners, but those I did take felt really good and stable! I'll push it harder tomorrow, but I can tell it's got less body roll already. :yesnod: i definitely noticed a big difference when i put my sways on (Eibachs) front and rear... :) |
Originally Posted by shinka213
(Post 2116973)
i definitely noticed a big difference when i put my sways on (Eibachs) front and rear...
:) Oh......BTW......I don't have much left besides just going down and getting that SC. :naughty: I'm about out of stuff to do! :scratchhe :rollingla |
Originally Posted by Mazurfer
(Post 2116982)
Tell you what, my townhome only has a small single garage Pat, and it's so tight in there. My knees are killing me! Getting too old for this crap! Actually it feels pretty good, just tired. Yeah, I can feel the difference in the sways, but as I said.....I go push it some tomorrow,
Oh......BTW......I don't have much left besides just going down and getting that SC. :naughty: I'm about out of stuff to do! :scratchhe :rollingla we put my sways on at an install meet and we had the benefit of a lift... we took off the front tray since we could get under it really easy...i stuck with the stock end links.... of course, the rear was a sinch... one of the best mods i got (bargain for the buck) :D: |
Originally Posted by Mazurfer
(Post 2116982)
Tell you what, my townhome only has a small single garage Pat, and it's so tight in there. My knees are killing me! Getting too old for this crap! Actually it feels pretty good, just tired. Yeah, I can feel the difference in the sways, but as I said.....I go push it some tomorrow,
Oh......BTW......I don't have much left besides just going down and getting that SC. :naughty: I'm about out of stuff to do! :scratchhe :rollingla Also, if you ever need any extra hands or space, you're welcome to bring your car to my garage. |
Thank you all for the bday wishes
|
Originally Posted by Charles R. Hill
(Post 2114652)
Is that sensor input on the X programmable to accept any sensor input or just IAT?
News: Scott from mazsport said me they have a "sensor in stock location". |
-----
|
Originally Posted by Charles R. Hill
(Post 2120096)
What Scott is saying, I think, is that the Int X uses the factory IAT sensor and the input port we are talking about is intended for an external wideband O2 sensor. IIRC, the input is a 1/8" female "audio" type plug, which is what the Innovate Wideband LC-1 unit, for example, uses for output to EMSs. Thus, a simple mono audio cable with 1/8" male ends will suffice.
I need IntX compatible IAT for 5/8 npt hole in pettit's intake. __________________________ Another way is to do not use microtech logging options. Zeitronix is the best! :) |
I have got to see how Vice Grip is going to pull off the map on page one for a Russian owner. I must have missed the posting that welcomed the new owner Funk Love, so belatedly I welcome you to the group of Pettit Owners.
|
Originally Posted by Phil's 8
(Post 2120401)
I have got to see how Vice Grip is going to pull off the map on page one for a Russian owner. I must have missed the posting that welcomed the new owner Funk Love, so belatedly I welcome you to the group of Pettit Owners.
Im not a RX-8 owner :smoker: But i bought and installed kit for our moscow customer. I'm happy with this great product and will buy 3-4 kits next year for russian RX-8 owners. |
Hey Guys and gal. I'm sure Cam mentioned this allready, but check the tension of your belts. I noticed after around 1k with the kit that boost started capping at 6.5 pounds. I tightened the belt and am back to an eight pound baby.
For those that are running the Int-X map from Cam; Is the car running smoothly, because the map i'm using(not Cam's) is so rich, I am literally breathing my own gasoline everytime I drive. |
When I did have the map from Cam it did not run rich. Yes it was running smoothly. Cam has my dongle with those maps.Maybe you can send him your dongle and have my old maps copied over.
|
Cams car is officialy hooked on meth. The A/I kit is installed and runs better then we perdicted. It almost freezes the intake pre blower and post I/C temps are colder then ambiant. The longer you run it in boost the colder it seems to get. Who woulda thought.
|
damn--- drive fast and cool your beer at the same time---:)
olddragger |
You up and running yet?
|
firing her up Saturday---been doing some "extra" stuff.
1-moved the firewall heater hose-- it now goes under the car ,2- oil filter relocation with aircraft fittings and stainless steel lines to the passenger side firewall, 3- custom windshield washer bottle 4-did a custom mod on the airbox defector tray (none of that rough stuff now visable) 5-fashioned custom cai to the engine bay (filter is still pettit stock) 6-got custom sock for filter 7-made hard mount for the vacuum tank thingy 8-did NICE looms for my gauge wiring and firewall mounted them. 9-did a little fuel line mod--mine felt like it had a little to much tension on it 10- did custom coil grounding cable separate from the oem loom one 11- fabricated a bigger air pick up for the pcm and int x box(have you ever fell how hot those things get?) 12- reinforced the oem undertray air channa----l the oem mount allows them to bend back at 60mph! 13 have removed the front bucktooth from the airdam area---you wouldnt believe how much air flow that thing was interfering with 14-- capped the tb coolant hoses--not just rerouted 15---trying to firgue out exactly what to do with the air conditioner hard line near the firewall. 16 designed a reroute for one of the a/w cooler hoses It's looking good. It is fun to take my time with it. Sure have learned alot. Steve Kan will be in Atlanta (75 miles away) next w/e and I have my car on his list stay tuned OD. |
| All times are GMT -5. The time now is 10:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands