mrgnex

My engine is probably on its last legs. I already bought a 6 port to replace my current 4 port and I want to make it special.
I was wondering if I could use a RX7 housing. Reason being the peripheral exhaust port. As I thought that more exhaust flow is better (I read that the exhaust ports on the Renesis are rather restrictive). Obviously I need a custom exhaust flange and fill in the water seal grooves on either the side or the rotor housing.

Is it apart from these things possible to use a RX7 housing and will it provide any benefit?

Loki

iTrader: (1)

Been covered many times, you can search for those threads. The long and short of it is it's a major project that will ultimately produce less power than a renesis unless you also turbo it. The peripheral ports produce entirely different timing and if you don't also seal the side ports you have really wacky timing.

mrgnex

Thanks. I saw the threads as soon as I posted. I did search but apparently not good enough.
I'll look a little more into it before probably giving up :p

TeamRX8

iTrader: (25)

Please select edit in your first post and then delete it.

AAaF

If you did the same with your post similar to this, that would be great. Do you get a hard one every time you write replies like this? Must be something, since you bother polluting the forum with them.

TeamRX8

iTrader: (25)

Hopefully you were looking in the mirror when you posted that. Unlike yourself, all I did is politely ask him to delete it, which then deletes my comment (and now yours too).