Greddykit: wat turbo should i upgrade too
jsut bought a greddy turbo kit comple. before putting it on i wanted t upgrade the turbo to something more powerfull. and im wondering if any oen out there have any coments and advice that could help em out and sich for a turbo the spools what nice on the rx8. im not looking for too much turbo just a little mroe than what the greddy offers trying to go over 300hp to wheals so let em know i was thing a ball bearing turbo if any one knows a good brand let em know thanks
|
|
At this time, there is only one bolt-on solution.
Loooong wait times, however. |
^I will be inquiring on this sometime in the spring ;)
|
Originally Posted by MazdaManiac
(Post 2732209)
At this time, there is only one bolt-on solution.
Loooong wait times, however. |
Jeff accepts special "services" from wives as well. lol
|
and im wondering if any oen out there have any coments and advice that could help em out and sich for a turbo the spools what nice on the rx8. im not looking for too much turbo just a little mroe than what the greddy offers trying to go over 300hp to wheals so let em know
Yeah, what he said. Would it be possible for me to pay you extra $$$ to have faster delivery of your kit? Yeah, and let me know if this would make the slightest difference...... S |
poor stealth...hang in there bud!
|
yea i was thinking about his kit...but i bought my acessport from him... and i emailed him for help with my AFR going all over the place and he never replied just tired of writing emails and no help...so i dont want to buy any thing from him...unless he decides to check his email and give me a hand with an item i bought directly from him
|
I know i will have to do some modifications to fitting mounted and other shit...jw if there are experts out the that think the greddy kit could use a little bigger turbo if so what do u recoment i look at
|
Originally Posted by babyboyx8
(Post 2732789)
I know i will have to do some modifications to fitting mounted and other shit...jw if there are experts out the that think the greddy kit could use a little bigger turbo if so what do u recoment i look at
I can put a T88 in to treplace the Mitsu Td06-18g (greddy turbo) because it's bigger. however it will be pointless. it's naot matched to he flow characteristics of the Renesis.. You will want to stay with Garrett 3071R. |
Originally Posted by turborx8
(Post 2732619)
Would it be possible for me to pay you extra $$$ to have faster delivery of your kit?
Originally Posted by babyboyx8
(Post 2732788)
yea i was thinking about his kit...but i bought my acessport from him... and i emailed him for help with my AFR going all over the place and he never replied just tired of writing emails and no help.
|
yes i did i read it about 5 times tryin to see what i misssed till i got mad and unpluged and un maried the damn thing...on idle i got the right afr but if i step on it it ges down to high 12 or low 13 and it flashed red... for my car the first base map worked the best...the map that you start with because it came me short term fuel trim average of 0 but it does go up and down on idle
|
So, what's the problem?
|
im still a newb with my car in general but i kinda get what the TW is sayin. and yes it is similar to MMs upgrade but there are factory turbos and aftermarket ones that could provide the same performance or even better, just you have to do alot of research on what size turbine and look at its dynos and what applications its mostly used with.
But those are just my thoughts like i said im not an expert im still learning. :) Naldy |
Originally Posted by MazdaManiac
(Post 2733162)
No. Not really. Its not a motivation thing, its pure physics.
Throw money at any problem and it can usually be solved. |
Originally Posted by turborx8
(Post 2733926)
Hmm.. are you sure?
Throw money at any problem and it can usually be solved. Last I checked, it was a $1k job. I do it for about $180. So, you do the math. |
Originally Posted by MazdaManiac
(Post 2734099)
Lol. Its would have to be a LOT of money - enough to pay someone else to do it.
Last I checked, it was a $1k job. I do it for about $180. So, you do the math. |
All times are GMT -5. The time now is 09:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands