COBB Tuning Mazda RX-8 AccessPORT Promo/Teaser
|
cool vid
|
repost ....trey at cobb already posted it in the accessport thread...
|
my bad^^^^^^
|
Now all we need is a good base map for the greddy kit and I can ditch this interceptor-x.
|
Looks sweet but I am holding out for Hymee's project
|
itz taking forever for them to come out with the AP
|
Originally Posted by c41250n
(Post 2285552)
itz taking forever for them to come out with the AP
I can tell you that making boosted work with the factory PCM was no easy task. I can also tell you that reading a tuned file back off a factory PCM is a piece of cake. I think the timing is very suspicious. Lastly, I can tell you that you will have one very expensive option for factory PCM reprogramming and one very affordable option and, if I understand correctly, one mid-priced option. The affordable one should ship first! |
Right now, the only "shipping" option is the one from Florida and its popping motors.
Good work. The Cobb has nothing to do with anyone else's work - it is complete bespoke and based on years of experience with Subies and Mitsus. They have unlocked every single parameter in the PCM. Its been in development for two years and they had it unlocked by SEMA in 2006. Mine unit is on its way. I'll be able to provide tuning for anyone that wants it as soon as it goes out of beta. |
Originally Posted by MazdaManiac
(Post 2297993)
Right now, the only "shipping" option is the one from Florida and its popping motors.
Good work. The Cobb has nothing to do with anyone else's work - it is complete bespoke and based on years of experience with Subies and Mitsus. They have unlocked every single parameter in the PCM. Its been in development for two years and they had it unlocked by SEMA in 2006. Mine unit is on its way. I'll be able to provide tuning for anyone that wants it as soon as it goes out of beta. |
You first.
|
Oh boy a trip to Vegas!
|
Originally Posted by MazdaManiac
(Post 2297993)
Right now, the only "shipping" option is the one from Florida and its popping motors.
Good work. The Cobb has nothing to do with anyone else's work - it is complete bespoke and based on years of experience with Subies and Mitsus. They have unlocked every single parameter in the PCM. Its been in development for two years and they had it unlocked by SEMA in 2006. Mine unit is on its way. I'll be able to provide tuning for anyone that wants it as soon as it goes out of beta. "Throw a stick into a pack of dogs and the one that yelps the loudest is the one that got hit" I will reiterate, I DO NOT HAVE FIRST HAND KNOWLEDGE that anyone at Cobb looked at those files. However, the timing is very suspicious. As for doing damage with tuning tools, I can destroy a motor as quickly with a Motec as a Cosworth as a Pi as a.......... IF Cobb were shipping, I could destroy a motor with that as well. If given a chance, I could probably do it with a spanner. In short, it is the person behind the tool and not the tool. I am certain that Cobb will do an excellent job of producing a very nice looking tool for the task at hand. I am equally certain that customers will get the exact same capability without having to pay for the pretty package. No matter what happens, people will have options and that can only be a good thing for customers. |
Originally Posted by Easy_E1
(Post 2298033)
Oh boy a trip to Vegas!
It would be cool to do an N/A and an FI 4-port at the same time. Maybe we can get 09Factor to go, too. Make it a trifecta. Now add Jesse and that is a full plate! N/A, S/C 4-port, S/C 6-port, and turbo 4-port. What are we going to do with all of these unused engine management units?
Originally Posted by lolachampcar
(Post 2298062)
I will reiterate, I DO NOT HAVE FIRST HAND KNOWLEDGE that anyone at Cobb looked at those files. However, the timing is very suspicious.
In any event, I know for a fact that they did not. Its an entirely different process.
Originally Posted by lolachampcar
(Post 2298062)
No matter what happens, people will have options and that can only be a good thing for customers.
|
Originally Posted by MazdaManiac
(Post 2298064)
Still, quite an accusation. In any event, I know for a fact that they did not. Its an entirely different process. That being said, I will take your word for it. |
Originally Posted by MazdaManiac
(Post 2297993)
Mine unit is on its way. I'll be able to provide tuning for anyone that wants it as soon as it goes out of beta.
|
Originally Posted by MazdaManiac
(Post 2298064)
You and me, buddy!
It would be cool to do an N/A and an FI 4-port at the same time. Maybe we can get 09Factor to go, too. Make it a trifecta. Now add Jesse and that is a full plate! N/A, S/C 4-port, S/C 6-port, and turbo 4-port. What are we going to do with all of these unused engine management units? Still, quite an accusation. In any event, I know for a fact that they did not. Its an entirely different process. True. |
Well, Trey sent me an e-mail saying it was shipping yesterday, so we'll see.
|
Originally Posted by MazdaManiac
(Post 2297993)
They have unlocked every single parameter in the PCM. Its been in development for two years and they had it unlocked by SEMA in 2006.
|
Don't you love how it was all quite until I made my announcement?
Cheers, Hymee. |
should have sHHHHHHH lol
|
Originally Posted by Hymee
(Post 2299425)
Don't you love how it was all quite until I made my announcement?
Cheers, Hymee. I want a shoot-out and I want the Flashalyzer in it! |
Originally Posted by Hymee
(Post 2299425)
Don't you love how it was all quite until I made my announcement?
Cheers, Hymee. If you have the product ready to go then let's see it |
Cobb's system has been operational for two years!
Trey is a perfectionist, but he has been really dragging those of us that can sell the product through some fits. I think that its just timing. I seriously doubt he is even aware of the competition. The RX-8 market is a very small slice for him as far as he is concerned. |
Jeff you need to move up North and make it happen up here :p
|
All times are GMT -5. The time now is 05:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands