bobsaggit

I orderd the zex kit from summit racing. I have used summit many times befor knew they ship fast and are safe.this was befor i was a member of this forum. Now that i know there is a company out there that also adds install suport i will use them next time. At the time of purchase tho i didnt.

bobsaggit

So the gas line tap that comes with the kite dose not fit are stock gas line? Also the gas line u guys are using has a red clip sorta by the fire wall rite?

Rote8

Um, double and triple check any gas line fittings before starting, after starting, after driving and again the next day

I converted my gas line to a -6 AN from the firewall to the fuel rails, I do not like any plastic gas line.

bobsaggit

the only connector i see has about 8 wires and non are white there all like red and orange

wcs

iTrader: (2)

Connect white wire from the Zex kit to the bottom wire of the TB harness

bobsaggit

thanks for the picture. it really helps seeing that its a green wire. befor it sounded like i was splacing into a white one. got the install 100% now everything seems to be working good. just need to fill my bottle.

wcs

iTrader: (2)

^^^ LOL
As old as these ones as well I would imagine

Cattywampus

^^ we know

monchie

Any pictures of you now? lol

RXeligion

I know this thread is pretty specific to the ZEX kit, but would the possibility of popping apart one's intake be reduced by manually controlling the nitrous flow? That way one can cut the nitrous before letting off of the throttle. It makes sense to me.

Furthermore, this thread has taken most of the mystery of out nitrous, so I want to thank Al and Charles for putting so much effort into it. The only thing that could have made it better is functioning pictures...

Seems like nitrous might be right for me & mine.

alz0rz

iTrader: (41)

Yeah sorry about the pictures they are irrecoverable because the web server I had them on imploded.

Manually controlling nitrous flow would require discipline. I think, properly used, the nitrous module will always be a better option compared to our limited attention span and slow reaction time.

I also can't believe this was more then 2 years ago!

RXeligion

I can see your point, I've seen guys blow their intakes apart manually controlling nitrous, too. Perhaps I have too much confidence in myself.

Dont sweat the pictures, I'm sure there are pics around from other peoples installs and if I do this, I'm going straight through BHR because they have such great support. I have a couple of other upgrades that are going to happen first, and A LOT more reading, but thanks for giving me a good starting block. There are a lot more 8'ers with nitrous than I had thought, and thats a comforting thing to know.

Kamal El

all the flipping pictures are gone! Any other good install threads?

200.mph

iTrader: (9)

what do you need to know?

TripleRotor

New here, as you can see by my post count, but not new to rotaries (three RX-7s) and nitrous(spraying for 20 years). I saw somewhere that the secondary and tertiary injectors are far below their duty cycle values. How much hp/torque can the injectors support at 80% and 100% duty cycle. Can the factory fuel pump handle that much flow? I have always been a big fan of dry shots and letting the factory injectors take car of extra fuel.

Kamal El

Didnt see this reply thanks. I dont think Im going to consider this mod anymore. It would be nice to see the original pics though.

TripleRotor

You should consider a dry set-up. Really easy to set-up. Not a big fan of wet set-ups, because most intakes are not designed to distribute fuel properly. Based on what I read on here, seems like some people have had some puddling issues. Also, for some reason, the fuel solenoids are notorious for failing. I guess you could fix this with a Hobbs pressure switch. Most cars run about 20% rich with WOT to keep the cats safe. I am thinking with 93 octane, you could get away with a 40hp shot of nitrous without touching anything. I was surprised how little HP people were getting with the BHR kit. Seems like it was too rich. Don't forget that HP is just part of the story. The real fun is torque! 40HP shot should yield around 40 ft/lb if you have enough fuel. That is a 25% jump in torque!

200.mph

iTrader: (9)

i probably have a bunch of pics of my old set up somewhere but not a complete install pic/thread worthy