Removing side vents?
#1
6SPDUFO
Thread Starter
Join Date: Mar 2007
Location: Centerville, MN
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Removing side vents?
Anyone have instructions on how to pop out the side Vents? I've found instructions for the middle vents, which involves removing the head unit.
Thanks,
BlackNoir
Thanks,
BlackNoir
#2
Drive Like you stole it
Join Date: Jul 2006
Location: Knoxville, TN
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
I believe you can just remove the inside fender well and push it out from the inside... Not very hard at all. I will try and get you some pics if needed. Just let me know...
#4
6SPDUFO
Thread Starter
Join Date: Mar 2007
Location: Centerville, MN
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I should have been more specific. I meant the Interior Air Vents.. you know, the ones that blow that nice cool A/C at you.. but in my defense, this is the Interior forum, not Exterior.. :P
#5
Registered
iTrader: (2)
The shop manual says:
Driver's side:
1. Disconnect the negative battery cable.
2. Remove the instrument cluster.
3. Remove the dashboard garnish.
4. Pull the driver-side demister grille outward and remove it.
5. Install in teh reverse order of removal.
Passenger's side:
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove the passenger-side air bag module.
4. Pull the passenger-side demister grille outward and remove it.
5. Install in the reverse order of removal.
Driver's side:
1. Disconnect the negative battery cable.
2. Remove the instrument cluster.
3. Remove the dashboard garnish.
4. Pull the driver-side demister grille outward and remove it.
5. Install in teh reverse order of removal.
Passenger's side:
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove the passenger-side air bag module.
4. Pull the passenger-side demister grille outward and remove it.
5. Install in the reverse order of removal.
#9
FULLY SEMI AUTOMATIC
iTrader: (9)
#10
No but obviously you are. I've worked on rotaries for a long time. Just never had to remove those and before attempting to do so and break them I asked a serious question. Not sure what your problem is but you should chill out. No need to be rude about everything. This forum on for people who own the cars to share information and knowledge.
Last edited by rxgt08; 03-01-2016 at 01:32 PM.
#11
FULLY SEMI AUTOMATIC
iTrader: (9)
No but obviously you are. I've worked on rosaries for a long time. Just never had to remove those and before attempting to do so and break them I asked a serious question. Not sure what your problem is but you should chill out. No need to be rude about everything. This forum on for people who own the cars to share information and knowledge.
its simple remove the wheel liner, reach in behind the fender and squeez the tabs on the sides of the vent. im sure someone who has worked on rosaries for years could have just prayed for and answer tho
Thread
Thread Starter
Forum
Replies
Last Post
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM