Prosport Halo Gauges!
8 Attachment(s)
These just arrived in the mail today. These are the new Halo series gauges from Prosport. These are a step up from the premium series and have some cool features. Check out this youtube vid (not mine):
http://www.youtube.com/watch?v=MuhnNljkFTc Here are some pics of the gauges (got the typical NA setup, water temp, oil temp and oi pressure): Attachment 249970 Attachment 249971 Attachment 249972 Here's the water temp gauge up close (you can tell the Halo series because the smaller hash marks are justified to the outside edge of the gauge instead of the inside edge of the larger hash marks): Attachment 249973 All the hardware: Attachment 249974 Here's the touchpad up close. My plan is to set up a little gauge control panel in the ashtray, but I'll need to extend the wiring harness for the touchpad. Makes me a little nervous, we'll see if I follow through with that. Attachment 249975 The gauge pod I'm getting is 60mm and the Halo series only comes in 52mm, so I got these cool adapter rings: Attachment 249976 Adapter ring fitted to gauge: Attachment 249977 Now, I just need to receive the pod. Pdxhak and I are getting the same pod and having it shipped from Japan. It's something that hasn't been seen on the forum before, so I won't say too much more about it. It will be a surprise. If people like it, there may be a possibility of a group buy. |
6 Attachment(s)
Some install pics:
Here are pics of my gauge control center. The touchpads aren't wired up yet, so they aren't lit. The switch where the lighter was is the night mode override for when I have my lights on during the day. Attachment 249964 Completely stealth when closed: Attachment 249965 Some pics of the pod: Attachment 249966 Attachment 249967 Installed: Attachment 249968 Attachment 249969 |
6 Attachment(s)
|
I know which pod you're getting, should look quite nice with those gauges.
can't wait to see the finished product. :cool: |
Those look nice.
|
I wish I would have known these were coming out because I would have bought these over the premium gauges.
|
aipex: are you just going to use the touchpad to change brightness at night since the 3 colors won't let you use a day / night mode when the headlights are switched on?
|
Originally Posted by Jedi54
(Post 3832485)
aipex: are you just going to use the touchpad to change brightness at night since the 3 colors won't let you use a day / night mode when the headlights are switched on?
I do plan on using the touchpads, but not attached directly to the side of the gauge like in the video. I may have to extend the wiring harness because I'd like to install them in the ashtray. |
suscribed.. Can't wait for the finished pics
|
Those are really cool! Can't wait to see the install!
|
damn i am awaiting to get home to order some prosports and need a good pod....you should pm me what pod you are getting since i am in the market for one ;) <3
|
fancy stuffs. looks like Autometer's Nexus series is getting some competition...
|
These look like some badass gauges! Makes me want to get rid of my premium ones :lol2:. Can't wait to see the finished setup!
|
Originally Posted by pdxhak
(Post 3832482)
I wish I would have known these were coming out because I would have bought these over the premium gauges.
|
Added the first couple of install pics.
|
Looking good Aipex8. Is this your Christmas present to yourself? HaaHaa !! Love it. I want the POD to be here now (as I stomp my foot).
Are you going to cut off the upper Rad hose pipe connector as I did to mount the water temp adapter? Cant wait for more pics. Happy New Year. |
Originally Posted by ZOOM-I-DO
(Post 3834198)
Looking good Aipex8. Is this your Christmas present to yourself? HaaHaa !! Love it. I want the POD to be here now (as I stomp my foot).
Are you going to cut off the upper Rad hose pipe connector as I did to mount the water temp adapter? Cant wait for more pics. Happy New Year. Oh, and yes, the is my Christmas present to myself! :) |
Love the touch pad install in the ashtray!
|
Originally Posted by pdxhak
(Post 3834271)
Love the touch pad install in the ashtray!
|
You guys dig the felt lined ashtray insert? The double sided tape wasn't sticking to the stock plastic very well, when I would touch the touchpads they would move. I called CorkSport up and they had the JDM, felt lined one in stock so I ran over and picked it up. The touchpads stick much better to it and don't move when I touch them.
|
Remember that touch pad is very sensitive and only requires a light tap.
|
1 Attachment(s)
I got a package in the mail today! I'll post better pics when I get home tonight. Until then, here's an iPhone teaser pic:
Attachment 249861 |
What are your plans for mounting that to the dash?
|
crazy glue, staple gun, or duct tape.
I'm sure it'll look badass. ;) |
This bad boy will be mounted on my dash Sunday! Oh wait this is Aipex8's thread. He is getting a pod too :lol: And with cooler gauges.
|
All times are GMT -5. The time now is 07:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands