Prosport Gauges Lighting Help Please
 

Hey guys, got my prosport gauges and they are amazing. Just really well put together products.

I will post a review and pics after I get my temp sensor and fix this damn lighting issue!

Here is where i need some help.

I attatched the wires for White during the day and amber at night obviously.

I used the ACC from the cigarette lighter and the light wire that is Yellow/red stripe.

Not my gauges are amber in the day and white when I put my lights on. I tried a number of things but dont' have a schematic so didn't want to really start messing with the wires.

Can anyone tell me exactly what wires they used for the ACC and Light to make it amber in the night and white during the day?

Thanks very much everyone.

Henry

I am going to be ptting up a DIY n this in a day or two.....but from the sounds of it, you just need to switch your white and orange wires.....should solve the problem.

black/ red wire ( ground) - attatch to black
white - not needed...shouldn't be atatched to anything
orange/red wire ( switch power;become hot when lights are turned on ) - orange
yellow ( power ) - red and white wire to be connected to this

hope this helps.....and that no one flames you for not searching. keep an eye out for my DIY

thanks...
 

yea did a search and found some info but still not working correctly. i appreciate the response and will go back to the car tomorrow and check it out.