Programming keyless entry
I tried to program my keyless entry today, I bought new remotes off of Ebay. They have batteries in them but the batteries "could" be dead I guess.
I do the instructions and everything works great, except when I push buttons on the remote. I then take the key out and it locks/unlocks a couple of times and nothing works. Here is what I am doing: Programming Instructions Step 1: Open driver side door and leave open. Step 2: Lock and Unlock the drivers door using the power door lock switch on the door Step 3: Insert key into the ignition. Step 4: Turn Key to ON position and return to Lock (off) position. Do this 3 times within 10 seconds. LEAVE key in the ignition in Lock (off) position. Step 5: Close and open the drivers door 3 times. Leave door open after this step Step 6: ECU should respond by locking and unlocking the doors once. Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors. Step 8: Additional remotes, repeat Step 7 for up to 3 remotes total. Step 9: Remove the key from the ignition and the ECU will respond a final time with a series (about 4) of door locks and unlocks. |
does the car go into "programing mode?
Btw it's easier to push the little black button vs opening the door three times. |
Yes the car locks and unlocks once and then I push any button on the keypad twice and then remove the key from the ignition. It locks, unlocks, locks, unlocks, and then nothing works. It's pissing me off.
|
The batteries must be dead..
One the mode is accessed and the fob buttons are pressed twice...(the locks should cycle) The car should retain the freqencies. |
Figures... I'll get some new batteries next time I am in wal mart and try it again. Thanks.
|
What kind of remote did you get? is it a mazda remote, or can it be any remote?
|
No they are Mazda remotes, you can buy them off of Ebay pretty cheap. There are two sellers that stock them.
|
just in case u migth want to do a search on my post .i bought one of ebay too a guy in nj
but they never worked.so i gave it to my brother he has a mazda 6 and yeah it worked for him.its a oem mazda keyfob but not for the rx8.oh well hope you're not having the same problem. |
|
All times are GMT -5. The time now is 06:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands