My passenger window recently stop working. I've tried to control the window using the controls located on both doors, but neither seem to work. Can anyone tell me what might be the problem or how to go about fixing it myself?

 

does it work even a little? like can you push the button and help it with your hand?

if not.. then you should take the door panel off and get a voltmeter in there and see if there is power going to your motor.. and check all your wires, in both doors to make sure one didn't come loose.. it might be easier to just take it to mazda and see what they have to say about it.

 

you sure you haven't pushed the window lock button on your driver's door?

 

LOL i didn't think of that.. and i *think* that you would still be able to control it with the driver side buttons.

 

no, with lock button pushed, driver-side button does not operate passenger window.

 

Yes I'm sure. Believe me, that was the first thing I checked. I'm thinking about taking off the door panel to check and make sure everything is connected. Can anyone provide me with a link to a thread that shows how to do this? Thanks in advance.

 

there is a link to all the disassembly instructions in the diy section of the site

 

Well that worked for me!!....lock button

 

My windows quit working one day on my old Protege,
I found out after a very long time of not going through any drive-thrus that if the controls on the driver side were unplugged all four window controls quit working in the whole car.
Hopefully it's something really simple like that.