Notices

Need remote on for amp

Old Jan 13, 2006 | 08:26 PM
  #1  
bengraves's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 12
Likes: 0
Need remote on for amp

I am going to install a powered bazooka tube in my 8 and need to find a switched wire to turn the amp on and off. Can I get some help?
Reply
Old Jan 13, 2006 | 08:44 PM
  #2  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,286
Likes: 184
From: A Pacific Island.
Post On.....

If the tube is in the trunk (duh!), you can snake a wire under the console to the rear lighter socket, it's switched.

S
Reply
Old Jan 13, 2006 | 08:57 PM
  #3  
bengraves's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 12
Likes: 0
Nice - thank you -
Reply
Old Nov 5, 2006 | 08:47 PM
  #4  
dshiznit1489's Avatar
Formerly Polak Graphics
 
Joined: Aug 2006
Posts: 1,855
Likes: 0
From: New Jersey
why would you buy a bazooka in the 1st place?
Reply
Old Nov 6, 2006 | 07:59 AM
  #5  
jstkilntim's Avatar
resU deretsigeR
 
Joined: Jan 2006
Posts: 743
Likes: 0
From: Jacksonville, FL
Originally Posted by StealthTL
If the tube is in the trunk (duh!), you can snake a wire under the console to the rear lighter socket, it's switched.

S
Reply
Old Nov 6, 2006 | 12:18 PM
  #6  
tomf's Avatar
Registered
 
Joined: Sep 2006
Posts: 10
Likes: 0
not sure about this, but I was looking to buy an infinity basslink and their installation manual claims that if you use the speaker level inputs rather than line level (RCA) you do not need a remote turn on signal. It says the amp can sense the audio signal and turn on automatically. your bazooka might have the same thing?
Reply
Old Nov 6, 2006 | 04:00 PM
  #7  
jstkilntim's Avatar
resU deretsigeR
 
Joined: Jan 2006
Posts: 743
Likes: 0
From: Jacksonville, FL
Originally Posted by tomf
not sure about this, but I was looking to buy an infinity basslink and their installation manual claims that if you use the speaker level inputs rather than line level (RCA) you do not need a remote turn on signal. It says the amp can sense the audio signal and turn on automatically. your bazooka might have the same thing?
This is a great function, but you sometimes get nuisance "on & off's" during low volumes. If this happens, you will need to run the remote 12V.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cliffkemp
Series I Trouble Shooting
8
Dec 24, 2024 10:48 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
Sep 27, 2015 07:38 PM
juicemantwon
New Member Forum
3
Sep 26, 2015 12:30 PM
just1jack
New Member Forum
3
Sep 9, 2015 04:45 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 11:06 AM.