RX8Club.com - E-Brake

RX8Club.com (https://www.rx8club.com/)

- Series I Interior, Audio, and Electronics (https://www.rx8club.com/series-i-interior-audio-electronics-24/)

- - E-Brake (https://www.rx8club.com/series-i-interior-audio-electronics-24/e-brake-122454/)

BoBoF4T

07-20-2007 04:54 PM

E-Brake

Hey well I'm wondering if i can change the stock E-Brake handle with a after market one? Because I have to say i really don't like the stock E-Brake handle. So i was thinking of this momo 1.
http://img46.imageshack.us/img46/636...p008me4.th.jpg

Let me know what you think.

Thanks.

NgoRX8

07-20-2007 05:32 PM

you can, but you'd have to cut the stock one out. that means if you ever wanna go back to stock you'd have to go buy a new handle from mazda.

BoBoF4T

07-20-2007 06:14 PM

Thanks.

BoBoF4T

07-20-2007 09:07 PM

Also were do i need to cut it? and using what? a picture would be great. And how much.

Sorry I'm a noob.

G3tR3DDY2GR3DDY

07-20-2007 09:13 PM

well bobo if you do this and it turns out good let me know and ill do it otherwise i have an extra complete stock ebrake if you dont like it and all... thanks

BoBoF4T

07-20-2007 10:22 PM

Thanks.

I need a little more clear instructions on what to cut.

Mazurfer

07-20-2007 10:53 PM

Quote:

Originally Posted by BoBoF4T (Post 1980629)

Thanks.

I need a little more clear instructions on what to cut.

Search, there is a thread. You don't have to cut it out, but if the one you buy doesn't have the rubber piece at the bottom(it's very long in the front and short in the back and sits down in the opening) then you will want to cut the stock one. You can cut the rubber after you remove the whole assembly if you need to save it and re-use.

BoBoF4T

07-21-2007 10:50 AM

Im going to search.

All times are GMT -5. The time now is 05:56 PM.