12" subwoofer box
does anybody happen to have the dimensions or plans for a box using 3/4" MDF to hold a single 12" sub for the rx8? any help would be appreciated.
thanks in advance |
2 Attachment(s)
Here are the external dimensions for a box to hold a 12 inch speaker that will fit in the trunk; 10x25x13. If in doubt on a box size then just get some cardboard and make a box to check for fit. I have a kicker 12l7 in mine, sealed. Before displacement the internal cu. is 1.33. To be honest though, I should've went with a really good 10 in a very large ported box as opposed to a 12 in a somewhat small sealed. You're choice.
|
|
not quite what i had in mind
|
Damn..^^ that takes up the whole trunk space.....not good
|
|
The ZEnclosures box is nice... maybe someone who has it can take measurements for you.
Buying it is not too expensive either. |
+1 for the Zenclosures box. If you really insist on making it yourself(Zencl. quality is tip top), someone did post the dimensions for their box on here in this subforum once before....
|
It does take up a some room. It's not as tall as the picture makes it look. I still have storage on the sides and can easily reach over it to place things behind it. I don't have to worry about it moving around, nor do I have to do anything special to secure it. I rarely use my trunk for much. Plus, I can take it out without any problem. Not the best option if space is a concern, but certainly an option.
|
All times are GMT -5. The time now is 11:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands