RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Exterior Appearance and Body Kits (https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/)
-   -   Painted HID headlight housing (DIY) yea, i finally did it... (https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/painted-hid-headlight-housing-diy-yea-i-finally-did-144633/)

shakeyourbrakes 11-04-2009 09:32 PM

mine arnt white anymore, those are old pics, that lasted about a month then i switched to a dark gunmetal/black similar to his....

Ross_Dawg 11-05-2009 12:45 AM

Thanks guys!!

I painted everything black except for the super reflective parts. I did paint part of the Hi-Beam section (the lower part with all the ridges) It was a matte chrome so I knew it didnt really do much anyway.

I think coupled with the stealth turn signal bulbs the lights really pop now :D:

nvrfalter 11-06-2009 04:55 AM

nice job dude. they definitely look different than i had anticipated. maybe its just the pictures, but the painted stuff looks kinda metallic. not a negative comment tho.

if my nuts get as big as you and shakes, i'd love to do mine.

Ross_Dawg 11-06-2009 11:50 AM

Its not quite metallic. I used gloss black but honestly it looks more semi/matte than anything else up close. I still need to get those non glarey pics lol

Lil_Gato 11-06-2009 02:00 PM

I painted the whole inside black... everything, I used the fusion paint(good for plastics)... Highbeams are basically useless, the turn signals still show up.. but yeah its a good look... but not very useful.

Ross_Dawg 11-07-2009 12:17 AM

got pics? I was going to do that but then I thought nahh, if I ever wanted to sell the car I want it to look somewhat stock lol

rotary bizzawtch 05-18-2011 09:59 PM

i know im late here, but for those of you that painted your headlights completely black on the inside, does it affect your light output? or are the lights just as bright?

Rotr8 05-18-2011 10:03 PM

Lights are just as bright, the housing is independent from the bulb.

rotary bizzawtch 05-23-2011 12:35 PM

thanks!

gothmogthebalrog 07-18-2011 09:32 PM

Excellent DIY
 
2 Attachment(s)
I have not yet installed these- but I had to try this in Velocity Red. As seen I installed the Oracle Halos while they were open.

hoss -05 07-19-2011 12:29 AM

I cant wait to see those installed! Good job.

Lil_Gato 07-20-2011 04:16 AM

The light output isnt effected, the projectors are seperated from the area that gets painted, though if you do what i dod, and spray every other section then the high beams become useless.

Lil_Gato 07-20-2011 04:25 AM

http://a6.sphotos.ak.fbcdn.net/hphot...7_455831_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...7_554481_n.jpg

gothmogthebalrog 07-27-2011 07:57 PM

Installed Look
 
3 Attachment(s)
This was a great DIY- I airbrushed the tricoat, and went with high temp clear. The Oracle Halos look awesome.

smerf 07-27-2011 08:34 PM


Originally Posted by gothmogthebalrog (Post 4041407)
This was a great DIY- I airbrushed the tricoat, and went with high temp clear. The Oracle Halos look awesome.

Two things what paint did you use and also do you have a picture from far out so you can see the whole front of the car, and how it looks with the red housing

thanks!

gothmogthebalrog 08-03-2011 06:47 PM

Paint Color
 
The paint is the factory 27A paint code Velocity Red Mica, a tricoat. It was...a challenge. Using the factory paint this way on something so small and getting it right just took a lot of time, patience, and money. I had to mix the paint very thin to run through my airbrush, and apply several very fine coats first of the base, then the top. As stated I did not use auto clear, I used High temp clear.( and it orange peeled slightly) For anyone else trying to do this I recommend setting up several mix batches and finding a similar surface to paint on well before ever taking the light apart. Both layers require proper thinner and activator ratios to cure properly. (you have to know what you are doing) I have a local auto paint shop who will mix me small batches- some shops have the ability to pre-mix and put these in aerosol cans if you talk them into it.

I keep the car garaged, but the next time I have it out and clean I will grab a few "far back" pics.

g8ter 08-05-2011 05:08 AM

Great writeup might be my next project, Ross Dawg the black definitely looks good.

gothmogthebalrog 08-05-2011 03:13 PM

2 Attachment(s)

Originally Posted by smerf (Post 4041422)
two things what paint did you use and also do you have a picture from far out so you can see the whole front of the car, and how it looks with the red housing

thanks!

Attachment 175332

Attachment 175333

9krpmrx8 08-05-2011 03:44 PM

Nice. I like the hood as well, what brand is it?

gothmogthebalrog 08-18-2011 11:09 PM

Hood
 

Originally Posted by 9krpmrx8 (Post 4048985)
Nice. I like the hood as well, what brand is it?

This is the vented "Chaser IS" style. fiberglass. There are differences in the high edge molding around either the vents or the rotor shape in the center of the hood.

http://www.shop4bodykits.com/0407-ma...d-p-65279.html

killa_j 08-28-2011 07:50 PM

i want hid lights. do you have a link where i can get the right hid kit? for all lights if possible. please and thanks.

hoss -05 08-29-2011 01:45 AM


i want hid lights. do you have a link where i can get the right hid kit? for all lights if possible. please and thanks
so you want an HID kit for the write side of the car then?

jesse rx8 08-29-2011 04:57 AM

1 Attachment(s)
Attachment 241541

Sorry for the size for some reason it just feels too red for me. I reccon would be way better like like lil gato
What do you guys think

Chad D. 08-29-2011 05:12 AM

should'a painted the rings black.

killa_j 08-29-2011 06:53 AM

Not the wright side of the hid but the right fit for the rx8. Every car has a different model. I'm just trying to find a link to buy rx8 hid lights.


All times are GMT -5. The time now is 03:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands