|
need new rims.
just don't do what that other guy did and buy the 16" automatic rims... |
LOL^ Give me yours!
By the way I will be painting it all WINNING BLUE except the hood of course! |
Looks pretty goods. Very agressive.
|
The hood looks good, the body kit should too when it's painted, but the mesh on the front bumper doesn't do it for me. I'll reserve judgment for when I see it on the 23rd though.
|
i hope you haven't been driving around like that...white front, black rear, white spoiler, blue car?
the fitment looks ok in these small pics, but the front bumper seems to flare forward when looking at the wheel well. i don't know, it just might be my eyes cuz of the high contrast of the white bumper. will wait to see when it's painted. |
Oh yes I have been driving around!!!!!......Don't forget the CF hood as well in the mix....it is flaring to much in the front becasue of my K&N Air filter is in the way....I am working on a work around....
|
Dont paint it, leave it the way it is, looks hotttt!
|
Originally Posted by t-run/8
(Post 1919604)
Dont paint it, leave it the way it is, looks hotttt!
is that sarcasism? |
so awesome
|
wow brice you have been busy..... well i should have a gauge pod for you soon... if you want one
|
yeah my body aches like hell and I think I lost 10lbs this weekend....sooooo freaking HOT!
|
I might take you up on the gauge pod......I might need it for my special projects :)
|
that looks hot the way it is.
dont get it painted, you'll ruin the multi-color hotness. |
blumonstr approximately how much lower do you think the ings front bumper sits than the stock. i'm thinking about getting this bumper and i was wondering about clearance. thanks
|
Originally Posted by kersh4w
(Post 1919683)
that looks hot the way it is.
dont get it painted, you'll ruin the multi-color hotness. I would paint the bonnet blue as well ....... |
Originally Posted by snipaz2420
(Post 1919691)
blumonstr approximately how much lower do you think the ings front bumper sits than the stock. i'm thinking about getting this bumper and i was wondering about clearance. thanks
It aligns with my intercooler perfectly so I would say it is about the same height as those with an App. Package. Those without an app package I would say max 2-3 inches I am going to rock the panda look\ Shark whale feel for a while I like all the people looking at me like WTF!!!! They hear the BOV and go WTH?!?!?!, then they see the flames and that just seals the deal for me. I will have it painted by the end of the month......maybe a blue cammo paint job...;) |
Originally Posted by Brettus
(Post 1919694)
sarcasim or are you on drugs ?
|
is the rear made of polyurethane?
|
New rims and tint needed.
|
is that the fitment and everything straight out of the shipping box? or is that out from the body shop already? if thats out the box that is very nice. I may have to consider..
|
Originally Posted by Brettus
(Post 1919694)
sarcasim or are you on drugs ?
I would paint the bonnet blue as well ....... |
The rear is urethane
I have been trying to get rims but VarneyMazda seems to have been on the down low. I Really wanted his GT-7 rims but anyway I can wait no big deal there will be other rims available. As for tint, it is in the very near future as well as Tinting the the tails, headlights, side markers car and etc... Fitment as follows it is mostly out of the box but those of you that do your own body work will know how easy/difficult it is to body work. The Wing had minor drilling that had to be done to make it perfect....probably 2-3 hrs worth of work. The rear bumper was one complete piece...as in there were no holes or slots for anything, such as the licsense plate light hole, holes to hold the plate and of course the mounting slots. I would say there was 4-5 hrs worth of work on the rear bumper but on a difficulty scale of 1-10 I would only say a 4. Carving and drilling was needed so not to bad. Fitment on the rear bumper was EXCELLENT!!! easy to fit and mount, urethane is very pliable which makes it easier to work with. The front bumper is fiberglass......what a bitch.....very stiff and difficult to work with I needed to carve out the side markers and now I have to refiberglass it to make it look good. Right now I am hoping that having it on the car and driving around will help relax and loosen the front bumper a lil bit. I had to remove the oem mounting bracket and redrill the aftermarket one to use the oem brackets. I then removed the side marker guides where the piece would typically snap to because of the way the mold was created for this particular piece. All in all the front bumper still requires more work....I am having some friends that have done this more to help out with perfecting fitment, patience and ahrd work will bring this project together. On a scale of 1-10 for difficulty I would say about a 7. Thanks for the comments BTW this was completely done by myself and I have never done any body work before..LOL |
looks good, I think I know what I'm going to save up for next. Are you going to use the ings sides or MS? I wonder how street concept's rmagic kit fits...
|
ING sides....any recommendations I would follow is to get urethane if possible
|
| All times are GMT -5. The time now is 01:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands